Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.3 Providing and fixing in position 35mm thick single or double leaf solid core type Sqmt 40flush door shutters (Indian Manufacturing Co. Ltd., Indian Ply Woodcompany,.M/s Mysore Commercial Ltd., or approved equivalent) with solidblock board core internally lipped with well seasoned commercial hard woodtimber, bonded with' water proof, phenol formaldehyde synthetic resin hotpressed confirming to I.S. 2202‐1973,With one side veneered includingmelamine polish in two or more coats and other commercial side includingpainting with two coat synthetic enamel paints of approved make and shade andquality to give a smooth and even surface (appcolite paint of Asian paints orLuxol of Burger paint) over one coat of wood primer.4 Item same as above with both side teak veneered with vertical grains or cross Sqmt 12bands including malamine polish in two or more'coats on both the side.5 Deleted6 Same as Item above but all exposed surfaces shall be finished with approved Nos. 4epoxy paint.but each door shutter shall have central panel of 6mm thick clearglass of size 500 x 1000i) 900 x 2100 Single Shutter7 Doorframes and shutters to be primered in stoving grade epoxy zinc phosphateprimer and finished in aliphatic grade UV resistant polyurethane paint ofapproved shade. Door frames and shutters to have all hardware preparations,prepunched at the factory for flush fixing of hardware at site.i) 1800 x: 2100 Double Shutter Nos. 33ii) 1125 x 2100 Single Shutter Nos. 1148 Deleted1BRICK MASONARY WORK:Providing and constructing 20/30 Cm thick Brickwork built with chimney bricks Cum 178.702of approved quality in cement mortar 1:6 with crushing strength not less then50kg/sq. cm and water absorption by wt. not more then 15% in foundation,plinth and superstructure including scaffolding, racking and striking of joints,curing etc. at all Depths/Heights completePLASTER WORK:1 Providing 6mm thick cement plaster over Brickwork or Concrete surface incement mortar 1:3, including all necessary scaffolding, watering, curing etc.complete at all floors and heights as directed by Architect/Engg in charge.Sqmt 7083.4Page 4 of 92