Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.C-3 Providing and installing pump with discharge and head as in Item C‐I above butcoupled to approved make Diesel Engine mounted with 24 Volts DC startingmotor, push button for manual starting Tacho generator attachment for multiplekicks, electronic panel for automatic starting, fuel tank for eight hours full loadrun of the pump, set of 24 V required ampere‐ hour capacity. heavy duty leadSet 1cell. leak prool battery including interbattery connectors and terminalscomplete, automatic. two rate circuit battery charger suitable for either quick ortrickle rate, suitable for 200/250 V 50 Hz supply, single phase, fabricated baseplate for pump and engine, suitable MB type pressure switches complete. Allcontrol units and instruments to be mounted on MCC specified under Item C‐2.C-4 Supplying and fixing wrought steel or MS fabricated air vessel in pump room300 mm dia. and 1200 high on M.S stand with necessary arrangement andincluding the cut off, drain and air release and drain pipes to the channel inpump room.C-5 Providing and installing jockey pump of 40 gpm at 75 Mt.head against all lossescomplete. With suitable motor and base plate all as Rom No. C‐I Providing andinstallin boostei pump of 450 Ur. per minute against 50 ML head against alllosses complete with suitable motor and base plate all as Rem No. C‐1.Set 5Set 2C-6 Providing and installing booster pump of 450 Ltr. per minute against 50 Mt. Set 2head against all losses complete with suitable motor and base plate all as itemNo. C-1.SECTION‐ DSPRINKLER INSTALLATIOND-1 Providing and fixing G.I 'C' Class pipes with screwed – or welded joints withspecials as necessary clamped to wall, beams or ceilings as per specificationswith approved anchor fastners; MS brackets testing to 13.5 Kg/Sq.cm hydraulkpressure after installation, and painting two coats of enamel paint of approvedcolour over two coats of primer.i) 150 mm dia. ‐do ‐ ‐ do ‐ welded joints - Deleted RMii) 100 mm dia. ‐do ‐ ‐ do ‐ ‐ do ‐ RM 117iii) 80 mm dia. ‐do.‐ ‐ do ‐ ‐ do ‐ RM 350iv) 65 mm dia. ‐do‐ ‐do‐‐do- RM 100v) 50 mmdia. ‐do ‐ ‐ do ‐ serewed joints RM 165vi) 40 mm dia. ‐do ‐ ‐ do ‐ ‐ do ‐ RM 150vii) 32 mm dia. ‐do ‐ ‐ do ‐ ‐ do ‐ RM 1000viii) 25 mm dia. ‐do ‐ ‐ do ‐ do ‐ RM 2600Page 28 of 92