Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.A-18Supplying and fixing C.I butterfly valve with tamper proof arrangement, nuts,bolts, gaskets, flanges, coupler etc. complete as specified.i) 80 mm dia No. 23ii) 100 mm dia No. 10iii) 200 mm dia No. 1SECTION – BSIAMESE INLET & BREACH CONNECTIONSB-1 Supplying and fixing Fire Brigade 150 min size breach inlet connection with Set 1four connecting points .65 mm size fixed over 150 mm dia G.I. Pipe necessarycompanion flanges, nuts, bolts, gasket. washers, outlets, necessary bronzecoupling connection : B215 etc. as specified.B-2 Supplying and installing 150 mm C.I. Sluice valve of non rising Spindle type; No. 2approved make as per IS‐780 (PN‐1.6)B-3 Supplying and fixing 150 mm GI 'C' Class pipe including necessary excavation RM 50in earth or murum, bailing or pumping out water from the trenches with shoringwherever necessary, refilling the trenches, removing away the surplus earth ordumping it on site as directed (depth upto 1000 mm) including short lengths andspecials as required, fixing supports,. painting two coats of approved enamelpaint over a coat of approved primer after laying and testing to 13.SKg/Sq.cmcomplete including necessary protective tape or hessian cloth for buried pipingcomplete as specified.B-4 Providing and fixing Siamese in breaching assembly in brass with twin 63 mmbreaching gun metal male inlets with non return valve, blank caps & drain valve.inlet boxes, gates & air release valves conforming to BS‐5041 Part 3 completeas specified.Set 1Page 26 of 92