Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.ESTIMATE OF COST OF FIRE FIGHTING WORK OF PROPOSED STPSECTION – AWET RISER & FIRE HYDRANTSA-1 Supplying and fixing GI 'C' Class pipe flanged/welded as specified, includingnecessary excavation in earth or murum, bailing or pumping out water from thetrenches with shoring wherever necessary, refilling the trenches, removing awaythe surplus earth or dumping it on site as directed (depth upto 1000 mm)including short lengths and special as required, laying PCC pedestals, supports,and testing 13.5Kg/Sq.cm complete including necessary protective tape orhessian cloth over a coat of bitumastic paint for buried piping complete asspecified.i) 150 mm dia. ‐do‐ to IS:1239 Rm 50ii) 100 mm dia. ‐do‐ to IS:1239 Rm 33A-2 Supplying and fixing 200 mm dia. G.1 'C' Class pipes to IS: 3589 (wall min. Rm 945mm thick) screwed flanged/ welded as specified and with heavy clamps,hangers, brackets or pipe supports all with screwed /bofted / welded joints asrequired including standard specials as necessary, fixing supports into masonrywalls or RCC with anchor fasteners an painting two finishing coats of enamelpaint of ap colour over a coat of approved primer after hydraulic testing to 13.55Kg/sq.cm pressure, complete as specified.A-5 i) 80 mm dia Rm 40.2A-6 Supplying & fixing 150 x 80 mm dia tee tapping with necessary flanges for 2 Set 49Nos. of single landing valves on wet risers including providing flanges withholes for fixing landing valves including paintingA-7 Supplying and fixing C.I double‐flanged sluice valve with non rising spindle &as per IS:780‐PN‐1.6 of approved make with necessary nuts, bolts, flanges,rubber gasket etc. complete as specified.i) 200 mm Nominal Bore No 6ii) 150 mm Nominal Bore No 12iii) 100 mm Nominal Bore No 10iv) 80 mm Nominal Bore No 8A-8a Supplying and fixing 150mm dia flanged C.I. tested non return valve as per No. 3IS:5213 of approved make with necessary nuts, bolts, flanges, rubber gasket etc.complete as specified.i) 100 mm dia as above. No. 5A-9a Supplying and fixing 200 mm horizontal pot strainer assembly With brass or2phosphor bronze working parts, necessary flanges, rubber gasket etc complete asspecifiedi) 100 mm dia do as above No. 4Page 24 of 92