Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.ALUMINIUM WORK1A Providing fabricating and fixing in position in perfect line and level and plumb Sqmt 326top hung aluminium windows with approved colour, satin finish 20 micronsanodizing coated heavy duty sections of approved make, with EPDMgasket/imported PVC gaskets, sealing the joints with silicon based sealant andmaking the joints water tight etc. complete as per drawing and instructions.1B Providing and fixing in item No. 1A, 6 mm thick machine cut, machine polished Sqmt 326edges, heat reflective hard coated glass of 'Glaverbell' or equivalent, colour ofthe glass as approved by Architect. The breakage and wastage shall be to thecontractor's account.2A Providing, fabricating and installing 1200 mm high continuous strip/horizontal Sqmt 1179structural glazing system made with international design and collaboration forflat, curved a sloping surfaces with approved aluminium colour, satin finish 20microns anodizing coated heavy duty sections, for frame work including itsfittings, fixtures, aluminium alloy extrusions and accessories, rain waterdrainage, seven stage barrier for enchanted performance of air and water sealing(iun a manner that does not required a sealing the joints with sealant), makingthe joints water tight, fixing the structural glazing frame to the building withnecessary inserts, anchor fastners, brackets, etc. complete. The exposed surfaces,etc. shall be epoxy coated. The rate to include detail design calculations takinginto consideration the wind load, seismic forces, adequate factor of sagety, andthe relevant IS code and the international code. Contractor to furnish detailedworking of the weight of Aluminium per Sq.Mt. the rate should include forproviding 20% openable panels with S.S. heavy duty friction stay and multipointlatching and acremone handle.2B Providing and fixing in item No. 2A, 6 mm thick machine polished edges, heat Sqmt 1179reflective hard coated imported glass of 'Glaverbell' or equivalent, colour of theglass as approved by architect. The breakage and wastage shall be to thecontractor's account.3A Providing, fabricating and fixing in position in perfect line and level and plumb Sqmt 73double shutter aluminium framed openable windows with aprpoved colourpolyster powder coated heavy duty sections, with EPDM gasket/imported PVCgaskets, sealing the joints water tight etc. along with aluminium sub framecomplete as per drawing and instructions.3B Same as item No. 1B, but using 6 mm clear glass. Sqmt 1804A Same as item No. 2A with 2870 mm high fixed structural glazing. Sqmt 1834B Same as item No. 2B, but using 12 mm the glass. Sqmt 183Page 10 of 92