SurgiGuide Cookbook - Dental-Depot

8. Implant placementScrew the correct implant holders on the corresponding implants, according to your planning.If the implants used are provided attached to a fixture mount of the manufacturer, exchangethe implant holders by making use of the titantium containers in the SAFE Kit to ease thisprocess. Perform the implant placement through the guiding tubes until the phyisical stoptouches the guiding tube. It is strongly recommended not to use excessive forces to push theplatform onto the guiding cylinder. This action can cause extreme heating because of friction,or might cause your implants to loose their primary rotating stability. It might be useful to takemechanical considerations into account in the choice of which implants to place first. This canprovide extra stabilization of the guide and reduce relative errors. It is recommended not toremove the implant holders until all implants have been positioned.Fig. 8: Implant Placement through SurgiGuide using SAFE Implant Holders 19. Remove implant holders and guideRemove the implant holders by loosening the screw connecting the implant with the implantholder. Use the correct equipment to unscrew, making sure the unscrewing is completebefore you remove the implant holder.10. Finishing of the implant sitesRemove the SurgiGuide and finish the surgery site as recommended by the implantmanufacturer. The SAFE System has transferred the planned implant positions in apredictable manner to the actual patient’s jaw.SURGICAL PROCEDURESFig. 9: Finishing of the implant site according to the recommendations of themanufacturer 180www.SimPlant.comSurgiGuide Cookbook