Safety Data Sheet Faceal Wood HD - pss-interservice.ch

Faceal Wood HDDirt and stain protection for wooden floors• Protection against staining and contamination• Protection against water and moistureProduct descriptionFaceal Wood HD is a next generation product for theprotection of untreated and restored wood.Faceal Wood HD has a good resistance againstabrasions and scratches and is particularly suitable foruse on indoor flooring.Faceal Wood HD can be applied to most woodensurfaces.Completely transparent after application,Faceal Wood HD penetrates the wood fibres, renderingthem water-repellent and resistant to stains (even greaseand oil stains) without affecting the structure and thenatural aspect of the wood (veins, fibres, etc.).Faceal Wood HD makes it easier to maintain and cleanthe wood.Faceal Wood HD also has anti-slip characteristics, idealfor wooden floors.Chemical composition• An innovative product consisting of fluorideresins and acrylics in an aqueous solution.Advantages and characteristics• Can be applied to most of types of interiorwood.• High level of protection against water, soiling,stains, and even grease.• Significant reduction of damp absorption.• Resistant to abrasion and scratches.• Anti-slip.• Limits the build-up of moss and lichen.• Permits the natural greying of wood• Transparent, environmentally friendly,safe• Colourless after drying: Preserves the naturallook of the wood.• Non-filmogenic: Allows wood to breathe• Facilitates cleaning.• Ready to use and easy to use.EnvironmentRespects the environment without risk.Ecological product in aqueous phase.• No oil solvents• No silicone• Not dangerous and non-toxic• Volatile organic compound: < 5 g/l• More than 90% biodegradablePackaging1 and 5 litre tins.Technical dataPhysical state at 20°C: LiquidColour: CreamyOdour: NonepH : 8 ± 0.5Boiling point [°C] : 100°CThickness: 1.05 Kg/lSolubility in water [vol/vol] : : TotalSparking point [°C]: Non-applicable

Usage• Mix the product well before use• Apply the product on a clean surface that is dryand free of dust. The temperature must be above10°C.• If the surface has to be cleaned up in advance,we recommend using Faceal WoodRevitalisor.• Do not apply to wood that has already beenvarnished or waxed.• Do not apply when it is raining or when theweather is very hot (> 40°C).• Use the product in its pure form: Do not dilute.• Test on a small surface that is not very visibleand leave it to dry for 24 hours, particularly onoily wood, exotic wood, oak and walnut, as wellas fire-retardant wood.• The item must be treated using 2 coats.Drying time between each coat:1 hour.• Protect from rain 24 hours before using again.• Optimum effectiveness is achieved after 5 to 7days.Application tools• Apply using a HVLP-type spray, a brush or arollerAdvice from the cabinetmaker• Apply Faceal Wood HD in the direction of thewood grain.• For a better result, sanding the surface using afine grain paper is recommended.• Domestic stains can be subsequently cleanedusing a sponge with Faceal Wood Cleaner.Application volumeThe amount to be used depends on the porosity of thematerial. The values below are given as a guide:8 to 12 m² / litreCleaning the material• Clean the tools and equipment usedimmediately after use.Storage• Store away in a dry place away from extremecold or heat: Temperature between 5°C and30°C.• Storage period: 12 months in the originalcontainer, not opened.Health and safety• Respiratory protection: No protective breathingequipment is required in normal conditions ofuse and where there is adequate ventilation.• Hand protection: Wear gloves.• Skin protection: No special clothing or skinprotection is required in normal conditions ofuse.• Eye protection: If there is an increased risk ofprojection, wear protective glasses.• If ingested: Do not force vomiting. Contact adoctor or specialist.Keep out of the reach of children!Technical assistancePSS Interservice AGPoststrasse 1, POB, CH - 8954 GeroldswilPhone: +41 44 749 24 24 Fax: +41 44 749 24 25E-mail: info@pss-technology.comwww.pss-technology.com