English - Winterhalter

More documents

Recommendations

Info

PIN Menu12.6 Changing the amount of detergent / rinse aidWhen a new detergent or a new rinse aid is used, it may be necessary to change the dosing amount. Pleaseobserve the dosing recommendations on the packing.The dosing amount can be adjusted separately for every standard programme.IMPORTANTIn the next menu, only the dosing amount of the installed dosing devices is changed. Pleaseconsult the corresponding device documents for external dosing devicesOpening the menu‣ Press the button.Changing the detergent dosing mixture‣ Select a washing programme: press one of the three buttons (1).INFO - The display of the three pictograms depends on the type of warewasher.- The dosing quantities for each washing programme can be set separately. The background of the selected button (1) and the button (4) changes to white. The current detergent dosing amount and the internal name (P003) is displayed in field (3).‣ Change the dosing amount with the scroll buttons (2).‣ Press the button (5) in order to save the entry. The button (5) flashes briefly in white.Changing the rinse aid dosing‣ Press the button. The background of the button becomes white.‣ The remaining steps are much the same as the steps for changing the detergent dosing mixture. Therefore,proceed as in the "Change detergent dosing mixture" section.‣ Press the back button (3) to exit from the menu.12.7 Resetting the water back-flow counterThe water back-flow counter must be reset if on machines with an external partial- or full desalinationunit this symbol flashes on the screen.‣ Contact an authorised service technician to exchange the external partial or full demineralisation unit.Resetting the water back-flow counter‣ Tap the row next to the following buttons‣ Press the back button (3) to exit from the menu.30
Integrated operating instructions13 Integrated operating instructionsThe integrated operating instructions has a short description of the operation of the machineRetrieving the integrated operating instructions‣ Tap the row next to the following buttonsRepeat14 Customer-specific modificationsThe machine can be adapted to individual needs within certain limits.Examples The pressure can be reduced if mainly light dishes parts are washed. The sound signal at the touch of a button can be disabled.‣ Contact an authorised service technician for the changes.15 Adjusting the machine and tableThe installation site must be frost-resistant so that the water supply systems do not freeze. If the installationsite is not frost-free: 19.15.1 Installing the machineINFO No gap is required between the wall and rear of machine.‣ Install the machine horizontally with the help of spirit level.‣ Adjust the base unevenness with the help of the height-adjustable machine feet.Installation variantsINFOIf the machine is installed in a corner, the left hood handle must be removed. For plugging holes akit with part no. 30002147 is available.15.2 Building tables‣ Table dismantling.‣ When <strong>Winterhalter</strong> tables are used, attach aluminium strut supports to the machineThe aluminium strut supports are in the machine.‣ Secure the table to the machine.‣ Connect the earthing cable from the table to the machine.31
Page 5: Before working with the machine2.3
Page 10: Rinse aid and detergent5 Rinse aid
Page 15 and 16: Operation7.3.7 Prematurely ending t
Page 17 and 18: Servicing and maintenanceTerminatin
Page 19 and 20: Malfunctions9 MalfunctionsThis chap
Page 21 and 22: Malfunctions9.1 Error code callIn t
Page 23 and 24: Info Level 1Integrated operating in
Page 25 and 26: PIN Menu12 PIN MenuINFO If you swit
Page 27 and 28: PIN Menu12.2 Automatic Switch On /
Page 29 and 30: PIN Menu12.4 Hygiene logbookIn the
Page 31: PIN MenuEnd of the descaling progra
Page 35 and 36: 16 Water connectionWater connection
Page 37 and 38: Electrical connection17.3 Wiring di
Page 39 and 40: External dosing devices18.2 Electri
Page 41: Technical Information21 Technical I

English - Winterhalter

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?