English - Winterhalter

PIN Menu12.2 Automatic Switch On / Switch OffHere you can: programme , when the machine should automatically fill and heat up. programme, when the machine should automatically switch off.The automatic switching on/off can be set either per day or for a special date. If the inputs overlap, a specificdate always takes precedence over the weekly programIMPORTANTThe following requirements must be met at the time of the automatic power-on: The hood is closed. The on-site mains disconnector is switched on. The water stop cock is open.Automatic Switch On programming‣ Tap the row next to the following buttonsSetting the weekday‣ Press the button (3).‣ Use the scroll buttons to select the required weekday.‣ Tap on the button of the selected weekday. The background of the button becomes white.‣ Enter the time for the start of automatic activation at thenumeric keypad.‣ Repeat the above step as necessary for the other daysof the week.‣ Check whether the button (3) is activated (white background).Only then is automatic switch-on active.‣ Press the back button (2) to save your input.Setting a special date‣ Press the button (1).‣ Enter the time and the date for the start of automaticactivation at the numeric keypad.‣ Check whether the button (1) is activated (white background).Only then is automatic switch-on active.‣ Press the back button (2) to save your input.INFOThe date and time of the next automatic activation aredisplayed when the machine is switched on. Of coursethe machine can be used before this point of time.25