English - Winterhalter

Malfunctions9.1 Error code callIn the display, the following symbol flashes‣ Tap the row next to the following buttons The error codes are displayed in area (a).INFO Malfunctions already resolved are also displayedhere (e.g. ERR 1 OK).‣ Contact an authorised service technician for the repair.‣ Press the button (b) twice to leave the Menu.9.2 Poor cleaning resultThe dishes do not get cleanThere is formation of layers onthe dishesThe dishes do not dry on theirownPossible CauseRemedySet the dosing amount as per the manufacturer’sspecifications ( 12.6)No or excessively low detergentCheck the dosing lines (for kinks, breakage,...)dosingExchange the storage container, if emptyDishes incorrectly sorted Do not stack dishes one over the otherNozzles of the wash arms Remove the wash arms and clean theblockednozzles ( 8.2)Excessively low temperatures Test the temperatures ( 10)In case of grease residues:The water is too hardIn case of starch residues:Temperature of the manual precleaning(brush) is higher than30 °CNo or excessively low rinse aiddosingWater intake pressure too lowCheck the water preparationClean thoroughlyLower the temperature of the manual precleaningCarry out the basic cleaning program( 12.5.2)Set the dosing amount as per the manufacturer’sspecifications ( 12.6)Check the dosing lines (for kinks, breakage,...)Exchange the storage container, if emptyContact an authorised service technicianfor the repairFor machines without integral softener:INFO The water quality affects the washing and drying performance. We therefore recommend from atotal hardness of more than 3° dH (0.53 mmol/l) that the machine is supplied with softened water.19