English - Winterhalter

MalfunctionsPictogram Meaning Possible Cause RemedyRotary wash arm is not correctlyengagedCorrectly engage the rotary washarmRotary wash arm obstructed by,Lower rotating wash e.g. a piece of cutleryRemove the obstructionarm is blocked. Rotary wash arm blocked by pollutionClean the wash arm bearing( 8.2)Defective drive 2Contact an authorised servicetechnician for the repairRotary wash arm obstructed by,e.g. high dishesRemove the obstructionUpper rotating washarm is blocked.Rotary wash arm blocked by pollutionClean the wash arm bearing( 8.2)Defective drive 2Contact an authorised servicetechnician for the repairFilter cylinderRemove, clean and replace theHeavily contaminated filter cylinderblockedfilter cylinderEnergy optimization 3Pump inlet filter notfittedPump inlet filter notfitted despite threepromptsAutomatic hoodopening 2 defectiveTank will be filledMalfunction witherror codeOn-site energy optimisationequipment switches individualelectrical consumers (heating elements).Missing pump inlet filter The machine switches offafter 30 seconds and will notbe filled.missing pump inlet filterIMPORTANT: The circulatingpump and drain pump can bedamaged by drawing in, for example,pieces of cutleryMotor defectiveStart a washing programme duringwhich the machine refills the waterVariousWait until the on-site energy optimisationequipment switches offFit the pump inlet filter and, if necessary,switch the machine onagain.INFO: When the prompt is downgradedthree times, the machinecan be switched onFit pump inlet filterContact an authorised servicetechnician for the repairWait till the machine has beenfilledDisplay the error code ( 9.1) andassign the repair to an authorisedservice technician2 Special equipment3 is displayed only when the machine is connected to an equipment with energy optimisation18