12.07.2015 Views

English - Winterhalter

English - Winterhalter

English - Winterhalter

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Malfunctions9 MalfunctionsThis chapter explains the remedies for malfunctions. The causes and remedies are specified in the tables.Contact a <strong>Winterhalter</strong> service engineer if you cannot rectify the error yourself.DangerDanger to life. Live components. Do not open any machine covers or machine parts if it requires tools. There is danger ofshock. Only a <strong>Winterhalter</strong> service engineer should carry out work on the electrical system. Themachine must first be disconnected from the mains.Faults are displayed in the information box in the form of pictograms. In addition, every malfunction will berecorded in the hygiene journal ( 12) and can be retrieved in Info Level 2 ( 11). Information is recorded inboth menus when the malfunction is remedied.Pictogram Meaning Possible Cause RemedyHood is open Programme start with open hood Close the hoodDetergent is empty 1Rinse aid is empty 1Lack of waterIntegral water treatmentis exhaustedExternal partial orfull demineralisationunit blockedService interval isrunning outCheck the calcificationWater shut-off valve closedDirt filter in the dirt trap is blockedSolenoid valve defective orblockedLow saltThe number of operating hours /cleaning programmes set in thecontrols has been reached.INFO: This function is not activatedin factory.The number of operating hours setin the control system has beenreached.Change the detergent storagecontainerChange the rinse aid storage containerOpen the water stop valveRemove and clean the dirt filter( 8.3)contact an authorised servicetechnician for the repairFill the salt reservoir with regeneratingsalt ( 6.2)Exchange the partial demineralisationunit; exchange the core of thefull demineralisation unit.contact an authorised servicetechnician for the repairStart the descaling programme( 12.5)1 is now displayed, when a suction tube with level control is used and connected to the machine.17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!