LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94[Dedicated Bellows JSSR-X for Model SSR]The table below shows the dimensions of dedicated bellows JSSR-X for model SSR. Specify the correspondingmodel number of the desired bellows from the table.bWb1SWPHModel No.JSSRPUnit: mmNote1) When desiring to use the dedicated bellows other than in horizontal mount (i.e., vertical, wall and inverted mount), orwhen desiring a heat-resistant type of bellows, contact THK.Note2) For lubrication when using the dedicated bellows, contact THK.Note3) When using the dedicated bellows, the LM block and LM rail need to be machined so that the bellows can be mounted.Be sure to indicate that the dedicated bellows is required when ordering the LM Guide.Model number codingat1Main dimensionsModels SSR15X to 25XMountingboltSW H H1 P b1 t1 b2 t2 t3 t4a XW/XTBXV15X 51 24 26 15 20.5 4.7 — — 8 — M35l 5 8.5 – 0.5 5H1bModels SSR30X and 35XSupportedmodelnumbers20X 58 26 30 15 25 4.2 — — 6 6 M35l 4 8 – 0.5 5 20X25X 71 33 38 20 29 5 — — 6 7 M35l 7 11.5 – 1 7 SSR 25X30X 76 37.5 37.5 20 35 9 12 17 — — M46l 3 8 — 7 30X35X 84 39 39 20 44 7 14 20 — — M510l 2 7 — 7 35XJSSR35X - 60/420Model number ofbellows for SSR35XDimensions of the bellows(length when compressed/ length when extended)St4t3Note) The length of the bellowsis calculated as follow.b2ALmaxLminSLmin S: Stroke length (mm)A– 1Lmax Lmin•AA: Extension rateIndustrial Technologiest215XB1-248