LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Incremental Dimension with Grease Nipple (When LiCS is Attached)Grease nippleGrease nippleSSRSRGEndplateModel SSRLocation for mounting the grease nipple* Because this model features a flange, it projects beyond the block end surface.Model number codingEndplateModel SRGLocation for mounting the grease nipple: ReferencesurfaceUnit: mm(*1) See A1-337 (*2) See A1-89 (*3) See A1-94 (*4) SeeA1-35Note) This model number indicates that a single-rail unit constitutes one set. (i.e., required number of sets when 2 rails areused in parallel is 2 at a minimum.)Those models equipped with QZ Lubricator cannot have a grease nipple.Model No.Incremental dimension with grease nippleEHNipple type15XVY 2.9 — PB1021B15XWY/XTBY 2.9 — PB1021B20XV 9 — B-M6F20XW/XTB 9 — B-M6F25XVY 9 — B-M6F25XWY/XTBY 9 — B-M6F30XW 9 — B-M6F35XW 8 — B-M6F15A — —* PB10715V — 4.5 PB107SSR20 XW 2 GG C1 +600L H -ModelnumberType ofLM blockWith LiCS(*1)No. of LM blocksused on the same railLM rail length(in mm)Radial clearancesymbol (*2)Normal (No symbol)Light preload (C1)Medium preload (C0)Symbol for No. of railsused on the same plane (*4)Accuracy symbol (*3)Normal grade (No Symbol)High accuracy grade (H)/Precision grade (P)Super precision grade (SP)/Ultra precision grade (UP)Industrial TechnologiesB1-246