LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94B6-SlCMTLM rail dimensionsBasicload ratingWidth Height Pitch Length C C0W1W2WW1KH3M1hφ d2φd1NFEModels SRG25 to 65R/LR/LVStatic permissiblemoment kN-m MA MB MC1 Doubleblock blocks1 Doubleblock blocks1blockLMblockUnit: mmH3 0 W2 M1 F d1d2h Max kN kNkg kg/m-0.054 15 9.5 15.5 30 4.57.55.3 2500 11.3 25.8 0.21 1.24 0.21 1.24 0.24 0.15 1.584.6 20 12 20 30 69.58.5 300021 46.9 0.48 2.74 0.48 2.74 0.58 0.2826.7 63.8 0.88 4.49 0.88 4.49 0.79 0.38 2.584.5 23 12.5 23 30 7119 3000 27.9 57.5 0.641 3.7 0.641 3.7 0.795 0.634.2 75 1.07 5.74 1.07 5.74 1.03 0.83.65 28 16 26 40 91412 3000 39.3 82.5 1.02 6.21 1.02 6.21 1.47 0.948.3 108 1.76 9.73 1.76 9.73 1.92 1.24.46 34 18 30 40 91412 3000 59.1 119 1.66 10.1 1.66 10.1 2.39 1.676 165 3.13 17 3.13 17 3.31 2.16.98 45 20.5 37 52.5 142017 3090 91.9 192 3.49 20 3.49 20 4.98 3.2115 256 6.13 32.2 6.13 32.2 6.64 4.111.610 53 23.5 43 60 162320 3060131 266 5.82 33 5.82 33 8.19 5167 366 10.8 57 10.8 57 11.2 6.915.811.5 63 31.5 54 75 182622 3000 278 599 22.7 120 22.7 120 22.1 12.1 23.7Note) The greasing hole on the top face and the pilot hole of the side nipple are not drilled through in order to prevent foreignmaterial from entering the block.See B1-270 for details.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-224.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherLL1e04-φ D0f0MassLMrailLM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-223