LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94d2M1hRd1FStraight railBθ 1θ1θ 2θCurved railUnit: mmBasic dynamicMounting holeCurved railload rating (C)Basic static load rating (C0)d1d2h R n θ° θ 1° θ 2°Resultant load Straight section Curved section(C) kN (Cost) kN (Cor) kN150 3 60 7 234.57.55.3 300 5 60 6 12 2.56 4.23 0.44400 7 60 3 9500 9 60 2 77119 750 12 60 2.5 5 9.41 10.8 6.71000 15 60 2 4600 7 60 3 991412800 11 60 2.5 5.51000 12 60 2.5 517.7 19 11.51300 17 60 2 3.5800 8 60 2 81420171000 10 60 3 61200 12 60 2.5 528.1 29.7 18.21600 15 60 2 41000 8 60 2 81500 10 60 3 6182622 2000 12 45 0.5 4 66.2 66.7 36.22500 13 45 1.5 3.53000 10 30 1.5 3When a moment is applied where one LM block is specified per axis, the LM block may experiencenon-smooth motion.We recommend that multiple LM blocks be used per axis when a moment is applied.Table 1 shows the static permissible moment of an LM block in the MA, MB and MC directions.θLM GuideIndustrial TechnologiesTable1 Static Permissible Moments of Model HMGUnit: kN-mModel No.MA MB MCStraight section Curved section Straight section Curved section Straight section Curved sectionHMG15 0.008 0.007 0.008 0.01 0.027 0.003HMG25 0.1 0.04 0.1 0.05 0.11 0.07HMG35 0.22 0.11 0.22 0.12 0.29 0.17HMG45 0.48 0.2 0.48 0.22 0.58 0.34HMG65 1.47 0.66 1.47 0.73 1.83 0.94Description of Each OptionA1-333 DimensionsB1-235B1-183