LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94WBB14-SlELL1CK1MUnit: mmNote) A moment in the direction MC can be received if two rails are used in parallel. However, since it depends on the distancebetween the two rails, the moment in the direction MC is omitted here.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-156.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks in close contact.Clients who require wall-mounted installations or oil lubrication should contact THK.Model number codingLM blockW4W1W2LM rail dimensionsTKBasic loadratingWidth Height Pitch Length C C0W1 W2 W4 M1 F d1d2h Max kN kNH3Models GSR20 to 35T, Models GSR20V and 25V15 25 7.5 11.5 60 4.57.55.3 200020 33 10 13 60 69.58.5 300023 38 11.5 16.5 60 7119 30005.694.319.227.0113.510.298.435.5913.28.821912.65LM rail1blockModels GSR15 to 35TStatic permissiblemoment kN-m MADoubleblocks1blockMBDoubleblocks0.0525 0.292 0.0452 0.2520.0252 0.158 0.0218 0.1360.102 0.564 0.0885 0.4860.0498 0.307 0.0431 0.2650.177 0.9650.0858 0.5220.152 0.8310.0742 0.451LMblockkg0.130.080.250.170.50.2928 44.5 14 19 80 91412 3000 18.8 25.9 0.282 1.54 0.243 1.32 0.6 3.6Mass34 54 17 22 80 1117.514 3000 25.1 33.8 0.421 2.28 0.362 1.96 1 5GSR25 T UUModelnumberM1Contamination protectionaccessory symbol (*1)Type of LM blockhφ d1φ d2NFGSR25 -1060L H KModelnumberLM rail length(in mm)Symbol fortapped-holeLM rail typeLMrailkg/m1.21.82.6Accuracy symbol (*2)Normal grade (No Symbol)High accuracy grade (H)Precision grade (P)LM GuideIndustrial Technologies(*1) See contamination protection accessory on A1-352. (*2) See A1-100.Description of Each OptionA1-333DimensionsB1-235B1-155