LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94E6-SLL1Ce04-φ D0LM rail dimensionsBasic loadratingWidth Height Pitch Length C C0W1M10-0.0525 23.5 17 40 69.58.5 3000hφ d2W2 M1 F d1d2h Max kN kNNφ d1FModel NR-LAStatic permissiblemoment kN-m MA MB MC1 Doubleblock blocks1 Doubleblock blocks334484.61130.7711.263.866.290.4690.7752.333.8228 31 21 80 7119 3000 48.7 122 1.26 6.63 0.778 4.0564.9 162 2.18 10.6 1.33 6.4734 33 24.5 80 91412 3000 63.1 155 1.75 9.47 1.08 5.885.7 210 3.14 15.5 1.92 9.4345 37.5 29 105 142017 300096 231 3.37 17.7 2.07 10.8126 303 5.93 28 3.59 16.953 43.5 36.5 120 162320 3000131 310 5.39 27.8 3.3 16.9170 402 8.87 43.8 5.41 26.663 53.5 43 150 182622 3000189 436 8.76 44.7 5.39 27.3260 600 16.8 79.9 10.1 4875 60 44 150 223226 3000271 610 14.4 73.3 8.91 44.7355 800 25.4 118 15.4 71.485 65 48 180 243528 3000336 751 20.3 102 12.4 62.6435 972 34.7 160 21 96.2100 80 57 210 263932 3000479 1040 34 167 20.7 101599 1300 47.3 238 29.2 1461block0.911.211.471.952.243.034.455.826.989.0511.615.919.325.226.834.643.454.6LMblockUnit: mmNote) Pilot holes for side nipples are not drilled through in order to prevent foreign material from entering the product.THK will mount grease nipples per your request. Therefore, do not use the side nipple pilot holes for purposes otherthan mounting a grease nipple.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-112.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherf0kg0.580.771.11.41.51.92.73.54.45.77.610.911.31516.220.726.731.2MassLMrailkg/m3.14.36.29.814.520.324.630.542.6LM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-105