LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94M1hφ d1φ d2NLM rail dimensionsBasic loadratingWidth Height Pitch Length C C0E 2-φ H4-φ HLEFModel SR-SBL1FModel SR-TBStatic permissiblemoment kN-m MA MB MCLMblockUnit: mmNote1) The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-96.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherNote2) The LM rail mounting hole of SR15 is drilled for M3 screws as standard (without Y indication). If you order the hole tobe drilled for M4 screws (with Y indication), contact THK. When replacing this model with model SSR, pay attention tothe dimension of the rail mounting hole.MassLM railW11 Double 1 Double 1W2 M1 F d1d2h Max kN kN±0.05block blocks block blocks blockkg kg/m15 18.5 12.5 60 3.564.52500 9.51 19.3 0.0925 0.516 0.0567 0.321 0.113 0.2(1240) 5.39 11.1 0.0326 0.224 0.0203 0.143 0.0654 0.151.220 19.5 15.5 60 69.58.53000 12.5 25.2 0.146 0.778 0.0896 0.481 0.194 0.4(1480) 7.16 14.4 0.053 0.332 0.0329 0.21 0.11 0.32.123 25 18 60 71193000 20.3 39.5 0.286 1.52 0.175 0.942 0.355 0.6(2020) 11.7 22.5 0.103 0.649 0.0642 0.41 0.201 0.42.728 31 23 80 71193000 30 56.8 0.494 2.55 0.303 1.57 0.611 1.1(2520) 17.2 32.5 0.163 1.08 0.102 0.692 0.352 0.84.334 33 27.5 80 914123000 41.7 77.2 0.74 4.01 0.454 2.49 1.01 1.5(2520) 23.8 44.1 0.259 1.68 0.161 1.07 0.576 16.445 37.5 35.5 105 1117.514 3000 55.3 101 1.1 5.96 0.679 3.69 1.77 2.5 11.348 46 38 120 142017 3000 89.1 157 2.27 11.3 1.39 6.98 2.87 4.2 12.8M1hφ d1φ d2NLL1CLM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-95