LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94High TemperatureIn a high temperature environment, dimensionalalteration caused by heat is problematic. Use a HighTemperature LM Guide, which is heat resistant andwhose dimensions little change after being heated, anda high temperature grease.Heat ResistanceHigh Temperature LM GuideIt is an LM Guide that is highly resistant to heatand whose dimensions little change after beingheated and cooled.GreaseHigh Temperature GreaseUse a high temperature grease with which therolling resistance of the LM system littlefluctuates even temperature changes from anormal to high range.Low TemperatureUse an LM system whose resin component are littleaffected by low temperature, as a measure to increasecorrosion resistance in transition from normal to lowtemperature, and a grease with a low rolling resistancefluctuation even at low temperature.Impact of Low Temperature on Resin ComponentsStainless Steel LM GuideThe endplate (ball circulation path normallymade of resin) of the LM block is made ofstainless steel.Corrosion PreventionProvide surface treatment to the LM system toincrease its corrosion resistance.GreaseUse THK AFC Grease, with which the rollingresistance of the system little fluctuates evenat low temperature.Micro MotionMicro strokes cause oil film break and poor lubrication,resulting in early wear. In such cases, select a greasewith which the oil film strength is high and an oil filmcan easily be formed.GreaseTHK AFC GreaseAFC Grease is a urea-based grease that excelsin oil film strength and wear resistance.High TemperatureLM GuideSupportedmodelsHigh TemperatureGreaseSupportedmodelsHSR-M1 SR-M1 RSR-M1Stainless SteelLM GuideSSR SHW SRS HSR SRHRW HR RSR RSHSurface TreatmentGreaseGreaseIndustrial TechnologiesA1-46