LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94ELL1Cφ d2NM1hLM rail dimensionsφ d1Basic loadratingWidth Height Pitch Length C C0FStatic permissible moment kN-m MA MB MC1 Doubleblock blocks1 Doubleblock blocks1blockLMblockUnit: mmW1±0.05W2 M1 F d1d2h Max kN kNkg kg/m15 9.5 15 60 4.57.55.33000(1240)8.33 13.5 0.0805 0.457 0.0805 0.457 0.0844 0.18 1.520 12 18 60 69.58.53000(1480)13.8 23.8 0.19 1.04 0.19 1.04 0.201 0.25 2.320 12 18 60 69.58.53000(1480)21.3 31.8 0.323 1.66 0.323 1.66 0.27 0.35 2.323 12.5 22 60 71193000(2020)19.9 34.4 0.307 1.71 0.307 1.71 0.344 0.54 3.323 12.5 22 60 71193000(2020)27.2 45.9 0.529 2.74 0.529 2.74 0.459 0.67 3.328 16 26 80 914123000(2520)28 46.8 0.524 2.7 0.524 2.7 0.562 0.9 4.828 16 26 80 914123000(2520)37.3 62.5 0.889 4.37 0.889 4.37 0.751 1.1 4.834 18 29 80 914123000(2520)37.3 61.1 0.782 3.93 0.782 3.93 0.905 1.5 6.634 18 29 80 914123000(2520)50.2 81.5 1.32 6.35 1.32 6.35 1.2 2 6.645 20.5 38 105 142017 30906080.495.61271.422.447.9212.61.422.447.9212.61.832.432.63.11153 23.5 44 120 162320 3060 88.5 137 2.45 13.2 2.45 13.2 3.2 4.3119 183 4.22 21.3 4.22 21.3 4.28 5.415.163 31.5 53 150 182622 30001411922152864.88.7223.540.54.88.7223.540.55.827.77.39.322.585 35.5 65 180 243528 30002102823104128.3114.245.672.58.3114.245.672.51114.7131635.2Note) Symbol M indicates that stainless steel is used in the LM block, LM rail and balls. Those models marked with this symbolare therefore highly resistant to corrosion and environment.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-88.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherMassLMrailLM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-77