LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94ELL1Cφ d2NM1LM rail dimensionsBasic loadratingWidth Height Pitch Length C C0hφ d1FStatic permissible moment kN-m MA MB MC1 Doubleblock blocks1 Doubleblock blocks1blockLMblockUnit: mmW1±0.05W2 M1 F d1d2h Max kN kNkg kg/m15 16 15 60 4.57.55.33000(1240)8.33 13.5 0.0805 0.457 0.0805 0.457 0.0844 0.2 1.520 21.5 18 60 69.58.53000(1480)13.8 23.8 0.19 1.04 0.19 1.04 0.201 0.35 2.320 21.5 18 60 69.58.53000(1480)21.3 31.8 0.323 1.66 0.323 1.66 0.27 0.47 2.323 23.5 22 60 71193000(2020)19.9 34.4 0.307 1.71 0.307 1.71 0.344 0.59 3.323 23.5 22 60 71193000(2020)27.2 45.9 0.529 2.74 0.529 2.74 0.459 0.75 3.328 31 26 80 914123000(2520)28 46.8 0.524 2.7 0.524 2.7 0.562 1.1 4.828 31 26 80 914123000(2520)37.3 62.5 0.889 4.37 0.889 4.37 0.751 1.3 4.834 33 29 80 914123000(2520)37.3 61.1 0.782 3.93 0.782 3.93 0.905 1.6 6.634 33 29 80 914123000(2520)50.2 81.5 1.32 6.35 1.32 6.35 1.2 2 6.645 37.5 38 105 142017 30906080.495.61271.422.447.9212.61.422.447.9212.61.832.432.83.31153 43.5 44 120 162320 3060 88.51191371832.454.2213.221.32.454.2213.221.33.24.284.55.715.163 53.5 53 150 182622 30001411922152864.88.7223.540.54.88.7223.540.55.827.78.510.722.585 65 65 180 243528 3000210 310 8.31 45.6 8.31 45.6 11 17282 412 14.2 72.5 14.2 72.5 14.7 2335.2Note) Symbol M indicates that stainless steel is used in the LM block, LM rail and balls. Those models marked with this symbolare therefore highly resistant to corrosion and environment.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-88.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherMassLMrailLM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-69