LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94E6-SlLL1Ce04-φ D0LM rail dimensionsBasic loadratingWidth Height Pitch Length C C0W1M1hφ d2Nφ d1FModel SNR-LRStatic permissiblemoment kN-m MA MB MC1 Doubleblock blocks1 Doubleblock blocks1blockLMblockUnit: mm0-0.05W2 M1 F d1d2h Max kN kNkg kg/m25 12.5 17 40 69.58.5 250048 79 0.682 3.62 0.427 2.25 0.868 0.457 101 1.14 5.55 0.708 3.4 1.1 0.63.128 16 21 80 7119 300068 106 1.04 5.7 0.653 3.56 1.3 0.781 138 1.81 8.89 1.12 5.47 1.69 0.94.434 18 24.5 80 91412 300090 144 1.61 8.64 1.01 5.39 2.13 1108 188 2.68 13.6 1.67 8.49 2.79 1.46.245 20.5 29 105 142017 3090132 216 3.29 16 2.03 9.86 4.21 1.9161 288 5.4 26.2 3.35 16.2 5.64 2.49.853 23.5 36.5 120 162320 3060177 292 4.99 25.7 3.11 16 6.69 3.1214 383 8.41 40.9 5.22 25.3 8.78 414.563 31.5 43 150 182622 3000260 409 8.05 41.2 5.03 25.6 11 5.6340 572 15.9 74.5 9.84 45.7 15.4 820.585 35.5 48 180 243528 3000 550 887 30.3 142 18.7 87.6 31.9 14.8 29.5Note) Pilot holes for side nipples are not drilled through in order to prevent foreign material from entering the product.THK will mount grease nipples per your request. Therefore, do not use the side nipple pilot holes for purposes otherthan mounting a grease nipple.The maximum length under “Length ” indicates the standard maximum length of an LM rail. (See B1-42.)Static permissible moment : 1 block: static permissible moment value with 1 LM blockDouble blocks: static permissible moment value with 2 blocks closely contacting with each otherf0MassLMrailLM GuideIndustrial TechnologiesDescription of Each OptionA1-333DimensionsB1-235B1-27