LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Models SNR-R and SNR-LRMTModel number codingB1-26W2Model No.WBW1OuterdimensionsHeight Width LengthKH3M1φ d2E4-SlLM block dimensionsModel SNR-RGreasenippleM W L B C Sl L1 T K N f0 E e0 D0 H3SNR 25R82.8 3531 50 32 M68 62.4SNR 25LR102 5081.69.7 25.5 7 6 12 4 3.9 B-M6F 5.5SNR 30R9838 60SNR 30LR120.5 40 4072.1M81060 94.69.7 31 7 7 12 6.5 3.9 B-M6F 7SNR 35R44 70 109.5 507950 M812 11.7SNR 35LR135 72 104.535 8 8 12 6 5.2 B-M6F 9SNR 45R52 86 138.2 6010560 M1017 14.7 40.4SNR 45LR171 80 137.810 8 16 8.5 5.2 B-PT1/8 11.6SNR 55R63 100 163.3SNR 55LR200.5 65 7595123.6M1218 17.7160.849 11 10 16 10 5.2 B-PT1/8 14SNR 65R75 126 186 70143.676 M1620 21.6SNR 65LR246 110 203.660 16 15 16 8.7 8.2 B-PT1/8 15SNR 85LR 90 156 302.8 100 140 M1825 251 27.3 73 20 20 16 10 8.2 B-PT1/8 17SNR45 LR 2 QZ KKHH C0 +1200L P T Z -ModelnumberType ofLM blockWith QZLubricatorNo. of LM blocksused on the same railhContaminationprotectionaccessorysymbol (*1)(*1) See contamination protection accessory on A1-352 (*2) See A1-89. (*3) See A1-95.(*4) Specify the plate cover or the steel tape. (*5) See A1-35.Note) This model number indicates that a single-rail unit constitutes one set. (i.e., required number of sets when 2 rails areused in parallel is 2 at a minimum.)Those models equipped with QZ Lubricator cannot have a grease nipple.φ d1NFLM rail length(in mm)Radial clearance symbol (*2)Normal (No symbol)Light preload (C1)Medium preload (C0)LL1CSymbol forLM railjointed usee04-φ D0f0Symbol forNo. of rails usedon the sameplane (*5)With plate coveror steel tape (*4)Accuracy symbol (*3)Normal grade (No Symbol)High accuracy grade (H)/Precision grade (P)Super precision grade (SP)/Ultra precision grade (UP)Industrial Technologies