LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Standard Length and Maximum Length of the LM RailTable1 shows the standard and maximum lengths of the SHS model rail. If a rail length longer thanthe listed max length is required, rails may be jointed to meet the overall length. Contact THK fordetails.For special rail lengths, it is recommended to use a value corresponding to the G dimension from thetable. As the G dimension increases, this portion becomes less stable and the accuracy performanceis severely impacted.GTable1 Standard Length and Maximum Length of the LM Rail for Model SHSUnit: mmModel No. SHS 15 SHS 20 SHS 25 SHS 30 SHS 35 SHS 45 SHS 55 SHS 65LM rail standardlength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tandard pitch F 60 60 60 80 80 105 120 150G 20 20 20 20 20 22.5 30 35Max length 2500 3000 3000 3000 3000 3090 3060 3000Note1) The maximum length varies with accuracy grades. Contact THK for details.Note2) If jointed rails are not allowed and a greater length than the maximum values above is required, contact THK.GIndustrial TechnologiesB1-12