LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94[Special environments]Clean RoomIn a clean environment generation of dustfrom the LM system has to be reducedand anti-rust oil cannot be used.Therefore, it is necessary to increase thecorrosion resistance of the LM system. Inaddition, depending on the level ofcleanliness, a dust collector is required.Dust Generation from the LM SystemMeasure to Prevent Dust GenerationResulting from Flying GreaseTHK AFE-CA and AFF GreaseUse environmentally clean grease thatproduces little dust.Measure to Reduce Dust GenerationResulting from Metallic Abrasion DustCaged Ball LM GuideUse the Caged Ball LM Guide, which hasno friction between balls and generateslittle metallic abrasion dust, to allowgeneration of dust to be minimized.Corrosion PreventionMaterial-based MeasureStainless Steel LM GuideThis LM Guide uses martensite stainlesssteel, which has corrosion resistant effect.Highly Corrosion Resistant LM GuideIt uses austenite stainless steel, which hasa high corrosion resistant effect, in its LMrail.Measure Through Surface TreatmentTHK AP-HC, AP-C and AP-CF TreatmentThe LM system is surface treated toincrease corrosion resistance.Caged Ball LM GuideSupportedmodelsCaged Roller LM GuideSupportedmodelsStainless Steel LM GuideSupportedmodelsSHS SSR SNR/SNSSHW SRS SCR EPFSRG SRN SRWSSR SHW SRS HSR SRHRW HR RSR RSHHighly Corrosion ResistantLM GuideSurface TreatmentGreaseIndustrial TechnologiesA1-38