LM Guide THK - Industrial Technologies

More documents

Recommendations

Info

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Precautions on UseLM GuidePrecautions on Using the LM Guide0[Handling](1) This product consists mostly of heavy items (20 kg or more). When moving heavy items, use 2or more people or moving equipment. This could cause injury or product damage.(2) Do not disassemble the parts. This will cause dust to enter the product resulting in loss of functionality.(3) Tilting an LM block or LM rail may cause them to fall by their own weight.(4) Take care not to drop or strike the LM guide. This could cause injury or product damage. Givingan impact to it could also cause damage to its function even if the product looks intact.(5) Prevent foreign material, such as dust or cutting chips, from entering the system. This couldcause damage to ball circulation components and loss of functionality.(6) When planning to use the LM system in an environment where the coolant penetrates the LMblock, it may cause trouble to product functions depending on the type of the coolant. ContactTHK for details.(7) Do not use the product at temperature of 80 or higher. Contact THK if you desire to use theproduct at a temperature of 80 or higher.(8) If foreign material such as dust or cutting chips adheres to the product, replenish the lubricantafter cleaning the product with pure white kerosene. For available types of detergent, contactTHK.(9) If an LM guide will be in an inverted orientation, take preventive measures such as adding asafety mechanism to prevent falls. If the end plate is damaged due to an accident, etc., ballsmay fall out of the guide or the LM block become detached from the LM rail and fall down.(10) When using the product in locations exposed to constant vibrations or in special environmentssuch as clean rooms, vacuum and low/high temperature, contact THK in advance.(11) When removing the LM block from the LM rail and then replacing the block, an LM block mounting/removingjig that facilitates such installation is available. Contact THK for details.[Lubrication](1) Thoroughly remove anti-rust oil and feed lubricant before using the product.(2) Do not mix lubricants of different physical properties.(3) In locations exposed to constant vibrations or in special environments such as clean rooms, vacuumand low/high temperature, normal lubricants may not be used. Contact THK for details.(4) When planning to use a special lubricant, contact THK before using it.(5) When adopting oil lubrication, the lubricant may not be distributed throughout the LM systemdepending on the mounting orientation of the system. Contact THK for details.(6) Lubrication interval varies according to the conditions. Contact THK for details.[Storage]When storing the LM Guide, enclose it in a package designated by THK and store it in a horizontalorientation while avoiding high temperature, low temperature and high humidity.Industrial TechnologiesA1-370
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Precautions on UsePrecautions on Using Options for the LM GuidePrecautions on Using Options for the LM GuideQZ Lubricator for the LM Guide[Precaution on Selection]Secure a stroke longer than the overall LM block with QZ Lubricator attached.[Handling]Take care not to drop or strike this product. This could cause injury or product damage.Do not block the vent hole with grease or the like.QZ is a lubricating device designed to feed a minimum amount of oil to the raceway, and does notprovide an anti-rust effect to the whole LM Guide. When using it in an environment subject to a coolantor the like, we strongly recommend applying grease to the mounting base of the LM Guide and tothe rail ends as an anti-rust measure.[Service environment]Be sure the service temperature of this product is between -10 to +50, and do not clean the productby immersing it in an organic solvent or white kerosene, or leave it unpacked. When using it outof the service temperature range, contact THK in advance.When desiring to use the product in a special environment, contact THK.Laminated Contact Scraper LaCS, Side Scraper for LM Guides[Handling]The lubricant impregnated into the scraper is used to increase its sliding capability. For lubrication ofthe LM Guide, attach QZ Lubricator, or the grease nipple on the side face of the end plate of the LMblock, before providing a lubricant.When using the product, be sure to attach the rail cap C or the plate cover.[Service environment]Be sure the service temperature of this product is between -20 to +80, and do not clean the productby immersing it in an organic solvent or white kerosene, or leave it unpacked.[Notes on the Product Functions]It is specifically designed to provide dust prevention capability to remove foreign material and liquid.To seal oil, an end seal is required.Light Contact Seal LiCS for LM Guides[Handling]The lubricant impregnated into LiCS is used to increase its sliding capability. For lubrication of theLM Guide, attach the grease nipple on the end plate of the LM block before providing a lubricant.LM GuideIndustrial TechnologiesA1-371
Page 1 and 2:
Индастриал Техноло
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321: Индастриал Техноло
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646:
show all

LM Guide THK - Industrial Technologies

Create successful ePaper yourself

Delete template?

Save as template?