LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94[Greasing Hole for Model SRW]Model SRW allows lubrication from both the side and top faces of the <strong>LM</strong> block. The greasing hole ofstandard types is not drilled through in order to prevent foreign material from entering the <strong>LM</strong> block.When using the greasing hole, contact <strong>THK</strong>.Model No.φ D2 depth 1f0Vφ D0e1e0Pilot hole for side nippleApplicablenippleGreasing hole on the top faceSide nippleUnit: mmGreasing hole on the top facee0 f0 D0 D2 (O-ring) V e170 7 17 5.2 M6F 13 (P10) 0.4 33.785 9 17.7 5.2 M6F 13 (P10) 0.4 42.75SRW 100 9 22.4 5.2 M6F 13 (P10) 0.4 55130 15 42 8.2 B-PT1/8 13 (P10) 0.4 10150 15 53 8.2 B-PT1/8 13 (P10) 0.4 10Note) The greasing interval is longer than that of full-roller types because of the roller cage effect. However, the actual greasinginterval may vary depending on the service environment, such as a high load and high speed. Contact <strong>THK</strong> fordetails.<strong>Industrial</strong> <strong>Technologies</strong>A1-364
Change language