LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Options[Greasing Hole for Model SRN]Model SRN allows lubrication from both the side and top faces of the <strong>LM</strong> block. The greasing hole ofstandard types is not drilled through in order to prevent foreign material from entering the <strong>LM</strong> block.When using the greasing hole, contact <strong>THK</strong>.Greasing hole on the top faceφ D2 depth 1φ D0(M6 pilot hole)Ve1e0f0Side nippleUnit: mmModel No.Pilot hole for side nipple Applicable Greasing hole on the top facee0 f0 D0nippleD2 (O-ring) V e135C35LC8 6.5 5.2 M6F 10.2 (P7) 0.4 635R35LR 8 6.5 5.2 M6F 10.2 (P7) 0.4 645C45LC 8.5 7 5.2 M6F 10.2 (P7) 0.4 7SRN45R45LR 8.5 7 5.2 M6F 10.2 (P7) 0.4 755C55LC 10 8 5.2 M6F 10.2 (P7) 0.4 1155R55LR 10 8 5.2 M6F 10.2 (P7) 0.4 1165LC 9 11 5.2 M6F 10.2 (P7) 0.4 1065LR 9 11 5.2 M6F 10.2 (P7) 0.4 10Note) The greasing interval is longer than that of full-roller types because of the roller cage effect. However, the actual greasinginterval may vary depending on the service environment, such as a high load and high speed. Contact <strong>THK</strong> fordetails.<strong>LM</strong> <strong>Guide</strong> (Options)<strong>Industrial</strong> <strong>Technologies</strong>A1-363