LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94OptionsRemoving/mounting JigJigRemoving/mounting Jig0When assembling the guide, do not remove the <strong>LM</strong> block from the <strong>LM</strong> rail whenever possible. If it isinevitable to remove the <strong>LM</strong> block due to the plate cover type or the assembly procedure, be sure touse the removing/mounting jig.Mounting the <strong>LM</strong> block without using the removing/mounting jig may cause rolling elements to fallfrom the <strong>LM</strong> block due to contamination by foreign material, damage to internal components or slightinclination. Mounting the <strong>LM</strong> block with some of the rolling elements missing may also cause damageto the <strong>LM</strong> block at an early stage.When using the removing/mounting jig, do not incline the jig and match the ends of both <strong>LM</strong> rails.If any of the rolling elements falls from the <strong>LM</strong> block, contact <strong>THK</strong> instead of using the product.Note that the removing/mounting jig is not included in the <strong>LM</strong> <strong>Guide</strong> package as standard. Whendesiring to use it, contact <strong>THK</strong>.<strong>LM</strong> railRemoving/mounting Jig(Material: ABS resin)<strong>LM</strong> blockRemoving/mounting Jig<strong>LM</strong> <strong>Guide</strong> (Options)<strong>Industrial</strong> <strong>Technologies</strong>A1-349