LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94• Test under an Environment with a Water-soluble Coolant[Test conditions] Test environment: water-soluble coolantMagnified view of the end seal lipItemDescriptionNo. 1: without LaCS - lip fractured at 1,700 kmTested No.1 SHS45R1SS+3000L (end seal only)model No.2 SHS45R1SSHH+3000L (end seal and LaCS)Maximumspeed200m/minEnvironmentalconditionsCoolant sprayed: 5 time per day[Test result]No.1withoutLaCSNo.2withLaCS[Test result] Amount of foreign material entering the racewayAmount of foreignSeal configurationmaterial enteringthe raceway gDouble-sealTestedmodel 10.3configurationTested(2 end seals superposed model 20.3with each other)Testedmodel 30.3Testedmodel 10LaCSTestedmodel 20Testedmodel 30A1-336End seal lip fracturedat 1,700 kmNot fractured at 5,000 km0 1000 2000 3000 4000 5000Distance traveled (km)Areas marked with arrow are fracturedNo. 2: with LaCS - no anomaly observed after traveling 5,000 kmLip has not been fractured• Test under an Environment with Minute Foreign Matter[Test conditions] Test environment: minute foreign materialItemDescriptionNo. 1 Traveled 100 km (double-seal configuration)Tested No.1 SNR45R1DD+600L (double seals only)model No.2 SNR45R1HH+600L (LaCS only)Max speed/60m/min, 1GaccelerationExternalload9.6kNForeignmaterialconditionsType: FCD450#115(particle diameter: 125 µm or less)Sprayed amount: 1g/1hour(total sprayed amount: 120 g)Large amount of foreign matter has entered the racewayNo. 2 Traveled 100 km (LaCS only)No foreign matter entering the raceway observedIndustrial Technologies