LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Model HSR-M1RWith this type, the <strong>LM</strong> block has a smaller width(W) and tapped holes. Used in places where thespace for table width is limited.Model HSR-M1LRThe <strong>LM</strong> block has the same sectional shape asmodel HSR-M1R, but has a longer overall <strong>LM</strong>block length (L) and a greater rated load.Model HSR-M1YRWhen using two units of <strong>LM</strong> <strong>Guide</strong> facing eachother, the previous model required much time inmachining the table and had difficulty achievingthe desired accuracy and adjusting the clearance.Since model HSR-M1YR has tappedholes on the side of the <strong>LM</strong> block, a simplerstructure is gained and significant man-hour cuttingand accuracy increase can be achieved.Specification TableB1-196Specification TableB1-196Specification TableB1-198<strong>Industrial</strong> <strong>Technologies</strong>Fig.1 Conventional StructureFig.2 Mounting Structure for Model HSR-M1YRA1-258