LM Guide THK - Industrial Technologies

Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Features of Each ModelSeparate Type (Radial) Model GSR-REquivalent LoadWhen the LM block of model GSR-R receivesloads in the radial, tensile lateral, reverse radialand compressive lateral directions simultaneously,the equivalent load is obtained from theequation below.PEPEX•PRPLPE : Equivalent load (N): Radial direction: Reverse radial direction: Tensile lateral direction: Compressive lateral directionPR : Radial load (N)PL : Reverse radial load (N)PTt : Tensile lateral load (N)PTc : Compressive lateral direction load(N)X, Y : Equivalent factor (see Table2)Service LifePTcFor details,see A1-76.Accuracy StandardsFor details,see A1-100.Table2 Equivalent Factor of Model GSR-R(when radial and tensile lateral loads are applied)Shoulder Height of the Mounting Base and the Corner RadiusFor details,see A1-313.Error Allowance in the Parallelism between Two RailsFor details,see A1-316.Y•PTtPE X YEquivalent load in theradial directionEquivalent load in tensilelateral direction1 1.280.781 1LM GuideIndustrial TechnologiesError Allowance in Vertical Level between Two RailsFor details,see A1-319.A1-221