LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
LM Guide THK - Industrial Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Индастриал Технолоджис www.industrial‐technologies.com.ua +38 044 498 21 94Service LifeFor details,see A1-76.Radial Clearance StandardFor details,see A1-91.Accuracy StandardsFor details,see A1-104.Shoulder Height of the Mounting Base and the Corner RadiusFor details,see A1-310.Accuracy of the Mounting SurfaceIf there is not sufficient precision in the <strong>LM</strong> rail and <strong>LM</strong> block mounting surfaces, the product may notfunction to its full potential.Table1 Machine to values no higher than those shown in... (Recommendedvalue: 70% of Table1)Table1 Flatness of the <strong>LM</strong> Rail and the <strong>LM</strong> Block MountingSurfaceUnit: mmModel No.Flatness errorEPF 7M, 9M 0.015/200EPF 12M 0.025/200EPF 15M 0.035/200Note) It is recommended that highly rigid materials such asiron or cast metal be used as the mounting material.If a material with poor rigidity, such as aluminum, isused, unforeseen loading may be applied to the product.In such situations, contact <strong>THK</strong>.<strong>Industrial</strong> <strong>Technologies</strong>A1-150