Lounge Chairs - Knoll

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWIN4-RE(A)
P4-RWIN4-
RE
infeed leg for rectangular
table,
right
A anodized finish
Specify:
1. Power infeed leg
2. Power infeed leg finish
Emanuela Frattini
Propeller� Electrical
Leg Options for Training and Conference Tables
Leg Options for Empty Plexus Boxes
description pattern no. type
P3-CLEG-PE P3-CLEG-PE-( ) Conference Std. leg, Empty
(Universal)
P3-TLEGU-PE P3-TLEGU-PE-( ) T-Leg, Empty (Universal)
P3-TLEGU-PE30-( ) T-Leg, Empty (Universal) for 30�
tables
P4-RWIN4-RER P4-RWIN4-RER-( ) Training Std. leg, Empty (Right)
P4-RWIN4-REL P4-RWIN4-REL-( ) Training Std. leg, Empty (Left)
P4-RWIN4-CRE P4-RWIN4-CRE-( ) C-Leg, Empty (Right)
P4-RWIN4-CLE P4-RWIN4-CLE-( ) C-Leg, Empty (Left)
P4-RWIN4-TE P4-RWIN4-TE-( ) Trapezoid Std. Leg, Empty
Finishes
Infeed leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
366
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway. Building power must be
turned off before reconfiguration.
Infeed leg:
Standard leg: extruded aluminum with
anodized or powder-coat finish. One
section of leg is completely enclosed for
electrical wiring, other section has clear
flexible PVC strips to lay in
communication wiring. Stamped steel
mounting plates with powder-coat finish.
Black nylon glides.
Standard conference, trapezoid and
T-Legs are universal and can be used on
either side of the table. For C-Legs and
training, specify right or left.