Lounge Chairs - Knoll

pattern no. list price
P4-RWR48 $436.
P4-RWR60 464.
P4-RWR66 464.
P4-RWR72 491.
P4-RWT 464.
P4-PDC-22 492.
P4-PDC-21 492.
P4-PDC-12 492.
P4-AMP-2A 563.
P4-AMP-2B 563.
P4-AMP1145A 527.
P4-AMP1145B 527.
P4-PDC-24 492.
P4-RWDA 34.
P4-RWDB 34.
P4-RWDX 34.
P4-RWDY 34.
P4-RWDOX 40.
P4-RWDOY 40.
Communication wiring has to be field
installed by communication contractor.
Raceway kits do not include wire
management trough for surplus wires.
Use P4-WMT/P4-WMTR
on page 358 for storage of surplus wires.
Jumper cables:
Jumper cables ensure power connection
in a straight line configuration, or for
tables
joined perpendicularly, or for
configurations with bridges or segments
between tables.
Jumper cables ship with clamps for
attachment underneath table top.
Power infeed leg:
Supplies raceway with power from
building power source. Complete leg
assembly hard- wired inside, fully
enclosed wiring. Use junction box to
connect raceway to building power.
Specify left leg if infeed is located left of
raceway, right leg if infeed is located
right of raceway. Power infeed has 6�
cord for hard wiring that can be cut to
length during installation of raceway.
Cord must be cut to 18� length or less for
application in New York City.
361
Duplex outlets:
Duplex outlet circuits are designated by
white letters on black background.
Communication modules:
AMP outlet faceplates are black textured
finish.
AMP RJ45 outlets are available with
EIA-T568B (ATT wiring) or EIA-T568A
(all other EIA wiring) configurations.
All RJ45 data/communication outlets are
specially configured and rated for
Category 5 high speed data cabling,
except those with couplers (Cat 3).
KnollStudio
Construction
Power infeed leg:
Extruded aluminum leg with glide and
cast aluminum end plate or cast
aluminum foot for C-legs or T-legs.
Wiring is shielded inside fully enclosed
leg section. 6� open lines to attach
junction box on bottom of leg. 9 1 /4� long
jumper infeed end at top of infeed leg
connects to raceway kit.
Raceway Kits:
Bent sheet metal trough with dark
metallic grey finish (suffix V).
Raceway is fully enclosed in metal
trough.
Refer to page 362 for jumper cables.