Lounge Chairs - Knoll

Designer(s):
Emanuela Frattini, 1994
Order Code
Example: P4-RWR60
P4 Propeller accessory
RW Raceway
R For rectangular table
60 For 60� wide table
Specify:
1. Suitable raceway kit for every table
2. Jumper cables for every table-to-table
connection
3. Power infeed leg (one per raceway)
4. Power infeed leg finish
5. Power and communication outlets
Emanuela Frattini
Propeller� Electrical
2+2 Raceway Components
description pattern no. type w d h
P4-RWR Power Raceway Kit for rectangular
table
P4-RWT Power Raceway Kit for trapezoid
table
P4-RWR48 48� w rect tbls 14� 2 1 /2� 3 1 /4�
P4-RWR60 60� w rect tbls 26� 2 1 /2� 3 1 /4�
P4-RWR66 66� w rect tbls 26� 2 1 /2� 3 1 /4�
P4-RWR72 72� w rect tbls 38� 2 1 /2� 3 1 /4�
P4-RWT Trapezoid table,
long side
Two RJ11 AMP (box of 10) P4-PDC-22 Two RJ11, 110
termination
P4-PDC-21 Two RJ11,
couplers
Two RJ45 AMP (box of 10) P4-PDC-12 Two RJ45,
couplers
P4-AMP-2A Two RJ45, IDC,
EIA-T568A/6+5
P4-AMP-2B Two RJ45, IDC,
EIA-T568B/6+5
RJ11/RJ45 AMP (box of 10) P4-AMP1145A RJ11, RJ45, 110,
EIA-T568A/6+5
P4-AMP1145B RJ11, RJ45, 110,
EIA-T568B/6+5
P4-PDC-24 RJ11, RJ45,
couplers
P4-RW-D Duplex outlets, black P4-RWDA Circuit A
P4-RWDB Circuit B
P4-RWDX Circuit X
P4-RWDY Circuit Y
P4-RW-DO Duplex outlets, orange P4-RWDOX Circuit X
P4-RWDOY Circuit Y
Ordering Information
Infeed leg finishes:
Anodized aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
Propeller raceway:
Propeller2+2Raceway is a four-circuit,
eight-wire modular power distribution
system available for all Knoll Systems. 2
+ 2 Raceway components distribute two
20-amp convenience circuits (A, B), with
neutral and ground, and two protected
20-amp circuits (X, Y) with separate
neutral and ground. UL183 listed for use
on tables.
360
A complete Propeller Raceway consists
of pre-assembled raceway kits mounted
inside metal troughs, jumper cables and
infeed legs.
• One raceway kit per table required.
• Jumper cables bridge power between
tables.
• Power infeed legs bring power from
building power to raceway.
The raceway circuit is connected to the
building power via a junction box.
Installation by licensed electrician only.
Maintenance:
See pages 27-28.
20� 2 1 /2� 3 1 /4�
Specification Information
Note: All tables must be ganged
permanently with electrical
connectors when used with
raceway.
Raceway:
All raceways include a pre-installed
power rail that fits 2 duplex outlets. The
20�,26�,38� long raceway also has
pre-cut holes for installation of two
double communication outlets. The 14�
raceway can fit either 2 duplex outlets or
one duplex outlet and one double
communications outlet. Raceways ship
with special locking connectors for
permanently ganging tables.