Lounge Chairs - Knoll

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-E-A
P4S- Medium shallow plexus box,
BOXM-E empty
A Anodized finish
Specify: Propeller table with desired
cutout size and location
1. Plexus box size
2. Anodized finish
Can also specify:
1. Empty leg, refer to page 358.
2. Electrical outlets, refer to page 358.
3. Communication outlets, refer to page
358.
4. Jumper cable to connect empty leg to
1st plexus (female-male), refer to
page 358.
5. Jumper cable to connect plexus boxes
(male-male), refer to page 358.
Power outlets to be installed by electrical
contractor; communication outlets to be
installed by licensed communications
contractor.
Emanuela Frattini
Propeller� Electrical
Empty Plexus Boxes for Hardwiring
description pattern no. accommodates w d h
P4S-BOXM-E medium shallow box, empty P4S-BOXM-E-(A) two duplex,
room for three
additional data
plates
P4S-BOXJ-E jumbo shallow box, empty P4S-BOXJ-E-(A) four duplex,
room for four
additional data
plates
P4SD-BOXM-E double shallow medium
box, empty
Finishes
Plexus Box lid/infeed leg finishes:
Aluminum (suffix A)
P4SD-BOXM-E-
(A)
350
four duplex,
room for six
additional data
plates
Empty Shallow Plexus for hardwiring
The Plexus Box offers room for wiring up
to four-circuits. A special empty infeed
leg must be specified to bring wires from
building power supply to Plexus Box. UL
listed product. Empty Plexus Boxes
simply attach to table with clamps from
underneath the table top. Universal in
application. Suitable for all regions if
installed by licensed electrician.
The empty Shallow Plexus Box offers
permanent power and data access at the
table top. The height of the box is only
2.8�; the data and electrical receptacles
are angled at 60 degrees for easier access
and complete knee clearance. All power
and communication wiring is completely
seperated by a metal septum to avoid
interference.
The extruded aluminum hinge lid
features a brush seal, allowing for wires
to pass when lid is closed. The shallow
box features a black reset button.
10.5� 7� 2.8�
20.5� 7� 2.8�
10.5� 12.5� 2.8�
Outlets:
Power outlets to be provided by electrical
contractor. For communication outlets
please refer to page 368. Communication
outlets may also be provided by
communications contractor.