Lounge Chairs - Knoll

Designer(s):
Emanuela Frattini
Order Code
Example: P4S-BOXM-PP-5-B-A
P4S- Medium shallow Plexus Box
BOXM-PP
5 Four category 5
transition cables
B ATT/Lucent
transition cables (non-EIA)
A Anodized Aluminum finish
Specify:
1. Plexus Box for cutout size
2. Desired data configuration
3. Select B for (ATT/Lucent) or A for
(EIA) wiring in building
4. Plexus Box lid finish
Emanuela Frattini
Propeller� Electrical
One-Circuit Plexus Boxes with Cordset
description pattern no. type w d h
P4SD-BOXM-PP medium shallow double
wide box with cordset and surge protector
Finishes
Plexus Box lid finishes:
Aluminum (suffix A)
P4SD-BOXM-PP-
11(A)
P4SD-BOXM-PP-
5-(A,B)-(A)
P4SD-BOXM-PP-
4511-(A,B)-(A)
348
four duplex,
eight RJ11
jacks, room for
4 additional
data plates
four duplex,
eight RJ45
jacks, room for
4 additional
data plates
four duplex,
four RJ11 jacks,
four RJ45 jacks,
room for 4
additional data
plates
Features
All power and communication wiring is
completely separated by metal septum to
avoid interference.
Shallow Plexus Box with Cordset:
The Shallow Plexus Box with cordset
offers temporary power and data access
at the table top. The height of the box is
only 2.8�; the data and electrical
receptacles are angled at 60 degrees for
easier access and complete knee
clearance. All power and communication
wiring is completely separated by a metal
septum to avoid interference. The
extruded aluminum hinge lid features a
brush seal, allowing for wires to pass
through when lid is closed. The shallow
box features a black circuit reset button.
10.5� 12.5� 2.8�
10.5� 12.5� 2.8�
10.5� 12.5� 2.8�
Shallow Plexus Box with cordset,
continued:
The Plexus Box with Cordset comprises a
single electrical circuit with a 3-prong
plug. The 15� cable can simply be
channeled through the Propeller leg to
connect to standard floor or wall outlets.
For horizontal wire management, use
wire management troughs on page 354.
Leg that is shipped with the Propeller
table is used with the Plexus box with
cordset.
UL listed product. Temporary Plexus
Boxes simply rest in the table cutout.
Universal in application. Do not attach
permanently to the table to comply with
UL requirements. This option is not
available for New York and Chicago.