Lounge Chairs - Knoll

Designer(s):
Amat-3
Order Code
Example: 31C-A
31C Twist Barstool, bar height
A Aluminum finish
Example: 31CK-K715/10
31CK Twist seat cover
K715/10 Abacus, Sand Dollar
Note:
Twist barstool can be used with Pensi bar
height tables on page 224.
Available in the United States only.
Specify:
1. Pattern number
2. Finish selection
For seat cover, specify:
1. Pattern number
2. Textile selection
Amat-3
Twist Barstool
description seat h arm h w d h
textile
fabric
yds.
req.
leather
sq. ft. weight
31C Twist Barstool, bar height 30 1 /2� 20� 20� 30 1 /2� 14 lbs.
31C2 Twist Barstool, counter height 26� 20� 20� 26� 14 lbs.
31CK Twist barstool seat cover 0.5 9
Ordering Information
Finishes:
Aluminum (suffix A)
Upholstery/COM information:
Prices shown include fabric or leather
upholstery. Contact your Knoll
representative for colors. Only approved
KnollTextiles and Spinneybeck leathers
may be ordered.
Customer’s Own Material is available
pending approval. For approval
requirements, processing instructions
and ordering information please see page
20.
Outdoor use:
With proper preventative maintenance,
the Twist barstool without pad is
appropriate for outdoor environments.
Aluminum will not reflect extreme
outdoor temperatures.
34
KnollStudio 20 Day Program:
The Twist bar and counter height stools
without a seat cover are available on the
20-day program. For specific
information, consult pages 29 - 32.
Cal 133 Fire Codef:
The Amat-3 Twist barstool without
upholstery complies with California
Technical Bulletin 133. See page 18.
The Twist Barstool is Greenguard
certified.
Maintenance:
See pages 27-28.
Construction
Seat and frame and footrest:
Constructed of polished, anodized cast
aluminum. The Twist Barstool is 100%
recyclable.
Twist seat cover:
The seat cover can be slipped over the
seat. It is held in place with an elastic
wrap. Seat cover is unpadded.
Twist Barstool is manufactured in Spain
by Amat-3.