Lounge Chairs - Knoll

Designer(s):
Emanuela Frattini, 2000
Order Code
Example: (2) P2-SH60-A
(3) P2-SHSD-A
P2-SH60 Propeller 60�-wide shelf,
two for back-to-back
configuration
A Aluminum finish
PS-SHSD Stanchion for back-to-back
configuration, three for
60�-wide shelf
A Aluminum finish
Specify:
1. Shelf Pattern number (double
quantity for back-to-back shelves)
2. Shelf finish
3. Stanchion type and required quantity
per shelf
4. Stanchion finish
5. Load bar
6. Load bar finish
Emanuela Frattini
Propeller� Accessories
Shelves and Stanchions with Load Bars
description pattern no. w d h
P2-SH Shelf for Propeller training table P2-SH24-( ) 24� 10 3 /4� 18� 2
P2-SH30-( ) 30� 10 3 /4� 18� 2
P2-SH36-( ) 36� 10 3 /4� 18� 2
P2-SH42-( ) 42� 10 3 /4� 18� 2
P2-SH48-( ) 48� 10 3 /4� 18� 3
P2-SH60-( ) 60� 10 3 /4� 18� 3
P2-SH66-( ) 66� 10 3 /4� 18� 3
P2-SH72-( ) 72� 10 3 /4� 18� 4
P2-SHS Stanchion for single table with
optional load bar bracket, per piece
P2-SHSD Stanchion for back-to-back tables
with optional load bar bracket, per piece
P2-SHLB Orchestra load bar for stanchion,
width to fit shelf width
Finishes
Shelf/stanchion/load bar finish:
Aluminum (suffix A)
Medium metallic grey (suffix 612)
Beige Mist (suffix 611)
P2-SHS-( )
P2-SHSD-( )
P2-SHLB24-( ) 24� 1 /2� 3�
P2-SHLB30-( ) 30� 1 /2� 3�
P2-SHLB36-( ) 36�
1
/2� 3�
P2-SHLB42-( ) 42�
1
/2� 3�
P2-SHLB48-( ) 48� 1 /2� 3�
P2-SHLB60-( ) 60� 1 /2� 3�
P2-SHLB66-( ) 66� 1 /2� 3�
P2-SHLB72-( ) 72� 1 /2� 3�
334
Features
Shelves:
Propeller shelves can be attached to any
Propeller table in the same width as table
or less. Shelf can be single or double in
back-to-back configurations. Shelves are
18� high when attached to stanchion and
align with 18� screens. Clearance below
shelf is 9 1 /4�. Height of shelf alone is
8 3 /4�.
Stanchions:
Number of stanchions required depends
on shelf width (see right column on left
page). Stanchion attaches by simply
screw-clamping onto table top from
bottom. Stanchion can be single or for
back-to-back configurations so shelves
can be hung from both sides. 3 /4� gap
between tables. Pre-drilled holes allow
for attachment of optional load bars.
no. of
stanchions
required
Load bar:
Standard KnollExtra load bar for
Orchestra accessories in three finishes.
Specify same width as shelf.