Lounge Chairs - Knoll

pattern no. veneer peanut
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-EP38 $14,669. $14,731. $24,780. $24,401. $25,074. $28,735. $30,172.
P3-EP40 14,698. 14,776. 24,869. 24,493. 25,185. 28,897. 30,343.
P3-EP56 15,191. 15,273. 26,241. 25,167. 25,879. 29,591. 31,071.
P3-EP58 15,274. 15,368. 26,382. 25,318. 26,049. 29,819. 31,309.
P3-EP60 15,304. 15,415. 26,476. 25,423. 26,168. 29,994. 31,494.
Electrical
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center (GG)
Two grommets, left & right (AG)
Single grommet, side (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut base tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes. Individual
table segments may be specified with
zero, one or two cutouts. To specify
plexus box and for more information, see
pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth (GJ)
321
Note:
- Double Plexus AMD and GMD
configurations not available on 42� and
48� deep tables.
Features
Maintenance:
See pages 27 -28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion that includes c-clips for wire
management. For tables without a frame,
please see page 342 to specify C-clips
seperately.
Base Location:
For stand alone tables, two peanut bases
will be located 20� from the edge of the
table. On multi-segment tables, the
peanut base is located at the center of
each segment except on certain four
segment tables, where some peanut bases
are shared between two segments.
Please note on 42� deep tables with
peanut base, the knee space dimension
immediately in front of the base is 7 1 /2�
from the edge.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.