You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
pattern no. veneer drum<br />
laminate/<br />
3mm edge<br />
laminate/<br />
PVC edge<br />
laminate/<br />
wood edge<br />
veneer/<br />
3mm edge<br />
veneer/<br />
PVC edge<br />
veneer/<br />
wood edge (PE)<br />
veneer/wood<br />
edge (AE, SE)<br />
P3-ED30 $15,242. $15,215. $22,470. $24,701. $25,305. $28,479. $29,904.<br />
P3-ED32 15,448. 15,428. 22,719. 24,962. 25,583. 28,815. 30,256.<br />
P3-ED34 15,475. 15,473. 22,776. 25,054. 25,691. 28,944. 30,392.<br />
P3-ED50 15,839. 15,842. 24,028. 25,577. 26,238. 29,812. 31,303.<br />
P3-ED52 16,045. 16,057. 24,280. 25,848. 26,526. 30,160. 31,668.<br />
P3-ED54 16,076. 16,103. 24,339. 25,952. 26,646. 30,333. 31,850.<br />
P3-ED36 17,912. 17,827. 27,771. 27,476. 28,132. 31,845. 33,438.<br />
P3-ED38 17,994. 17,921. 27,771. 27,618. 28,291. 32,060. 33,663.<br />
P3-ED40 18,437. 18,363. 28,386. 28,113. 28,801. 32,635. 34,268.<br />
P3-ED56 18,516. 18,460. 29,369. 28,383. 29,097. 32,916. 34,561.<br />
P3-ED58 18,598. 18,556. 29,511. 28,539. 29,266. 33,143. 34,800.<br />
P3-ED60 19,042. 19,001. 29,994. 29,041. 29,789. 33,731. 35,417.<br />
Electrical<br />
+ For more detailed information. consult<br />
the Electrical section of the Propeller<br />
Manual.<br />
Grommet options:<br />
Individual table segments may be<br />
specified with zero, one or two grommets.<br />
All grommets are 3 1 /4� in diameter.<br />
Grommet cover finish will always be<br />
Anodized Aluminum, see page 304 for<br />
details. Optional grommet-mounted<br />
power or communications receptacles<br />
available, see page 354.<br />
Grommet options: ($38 per cutout)<br />
No grommet (Y)<br />
Single grommet, center, mid-depth (GG)<br />
Two grommets, left & right, mid-depth<br />
(AG)<br />
Single grommet, right, mid-depth (HG)<br />
Single grommet, left, mid-depth (BG)<br />
Plexus cutout options:<br />
Tables can be hardwired using pre-wired<br />
or empty boxes, or plugged in with<br />
plexus boxes with cordset. All drum base<br />
and peanut tables can accomodate<br />
shallow medium plexus boxes, 60� tables<br />
can also accomodate double wide<br />
shallow medium plexus boxes.<br />
Individual table segments may be<br />
specified with zero, one or two cutouts.<br />
To specify plexus box and for more<br />
information, see pages 344-352.<br />
Cutout options for Plexus Boxes: ($38 per<br />
cutout)<br />
For no Plexus (Y)<br />
For medium Plexus, center, mid-depth<br />
(GM)<br />
For medium Plexus, left & right,<br />
mid-depth (AM)<br />
For double medium Plexus, center,<br />
mid-depth (GMD)<br />
For double medium Plexus, left and<br />
right, mid-depth (AMD)<br />
For jumbo Plexus, center, mid-depth<br />
(GJ)<br />
311<br />
Features<br />
Maintenance:<br />
See pages 27 - 28.<br />
Frame:<br />
Larger tables will incorporate a frame<br />
under the table. Frame is an aluminum<br />
extrusion and is shipped with C-clips for<br />
wire management. For tables without a<br />
frame, please see page 342 to specify<br />
clips seperately.<br />
Base Location:<br />
In most cases Drum bases will be located<br />
at the center of the table or segment -<br />
some exceptions arise on the<br />
multi-segment tables, where some drums<br />
are shared between two segments.<br />
Note:<br />
Propeller tables are Greenguard<br />
certified.<br />
<strong>Knoll</strong>Studio<br />
AM and AMD are not appropriate for<br />
stand alone tables or end segments.
Change language