Lounge Chairs - Knoll

pattern no. veneer drum
laminate/
3mm edge
laminate/
PVC edge
laminate/
wood edge
veneer/
3mm edge
veneer/
PVC edge
veneer/
wood edge (PE)
veneer/wood
edge (AE, SE)
P3-CD30 $6,845. $6,842. $12,449. $11,334. $11,615. $13,980. $14,679.
P3-CD32 6,852. 6,866. 12,504. 11,361. 11,660. 14,057. 14,760.
P3-CD34 6,983. 7,006. 12,783. 11,532. 11,959. 14,278. 14,993.
P3-CD36 8,080. 8,078. 13,868. 12,615. 12,948. 15,449. 16,222.
P3-CD38 8,295. 8,300. 14,117. 12,845. 13,194. 15,732. 16,518.
P3-CD40 10,652. 10,577. 16,385. 15,148. 15,514. 18,160. 19,068.
P3-CD50 7,514. 7,513. 13,137. 11,884. 12,195. 14,569. 15,298.
P3-CD52 7,520. 7,537. 13,196. 11,915. 12,245. 14,651. 15,383.
P3-CD54 7,790. 7,813. 13,732. 12,252. 12,599. 15,045. 15,796.
P3-CD56 8,890. 8,886. 14,815. 13,343. 13,704. 16,220. 17,031.
P3-CD58 8,600. 8,624. 14,593. 13,089. 13,469. 16,005. 16,805.
P3-CD60 8,696. 8,734. 14,733. 13,206. 13,606. 16,176. 16,984.
P3-FD26 12,467. 12,328. 19,090. 19,000. 19,377. 22,043. 23,146.
P3-FD30 12,647. 12,591. 20,233. 19,290. 19,758. 22,768. 23,908.
P3-FD32 12,868. 12,819. 20,498. 19,556. 20,043. 23,105. 24,261.
P3-FD34 13,168. 13,125. 20,855. 19,902. 20,405. 23,522. 24,698.
P3-FD36 13,192. 13,165. 20,920. 19,978. 20,498. 23,664. 24,847.
P3-FD38 13,630. 13,603. 21,388. 20,455. 20,994. 24,219. 25,429.
P3-FD46 13,477. 13,229. 19,852. 20,051. 20,360. 23,028. 24,178.
P3-FD50 13,816. 13,755. 22,232. 20,619. 21,132. 24,253. 25,466.
P3-FD52 14,036. 13,985. 22,499. 20,895. 21,424. 24,600. 25,831.
P3-FD54 14,341. 14,291. 22,861. 21,250. 21,797. 25,030. 26,282.
P3-FD56 14,367. 14,333. 22,927. 21,336. 21,899. 25,182. 26,441.
P3-FD58 14,805. 14,772. 23,402. 21,823. 22,405. 25,750. 27,037.
Electrical
+ For more detailed information. consult
the Electrical section of the Propeller
Manual.
Grommet options:
Individual table segments may be
specified with zero, one or two grommets.
All grommets are 3 1 /4� in diameter.
Grommet cover finish will always be
Anodized Aluminum, see page 304 for
details. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet options: ($38 per cutout)
No grommet (Y)
Single grommet, center, mid-depth (GG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, right, mid-depth (HG)
Single grommet, left, mid-depth (BG)
Plexus cutout options:
Tables can be hardwired using pre-wired
or empty boxes, or plugged in with
plexus boxes with cordset. All drum base
and peanut tables can accomodate
shallow medium plexus boxes, 60� tables
can also accomodate double wide
shallow medium plexus boxes.
Individual table segments may be
specified with zero, one or two cutouts.
To specify plexus box and for more
information, see pages 344-352.
Cutout options for Plexus Boxes: ($38 per
cutout)
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For double medium Plexus, center,
mid-depth (GMD)
For double medium Plexus, left and
right, mid-depth (AMD)
For jumbo Plexus, center, mid-depth
(GJ)
309
Features
Maintenance:
See pages 27 - 28.
Frame:
Larger tables will incorporate a frame
under the table. Frame is an aluminum
extrusion and is shipped with C-clips for
wire management. For tables without a
frame, please see page 342 to specify
clips seperately.
Base Location:
In most cases Drum bases will be located
at the center of the table or segment -
some exceptions arise on the
multi-segment tables, where some drums
are shared between two segments.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
AM and AMD are not appropriate for
stand alone tables or end segments.