Lounge Chairs - Knoll

Conference tables with Drum and Peanut bases offer enhanced wire
management capability and unobstructed kneespace. On most tables drum
and peanut bases will be located at the center of the table or segment, some
exceptions arise on tables with three and four segments, where a base is
shared between two segments.
Side panels:
The side panels of the Drum are
available in 18-gauge perforated
metal with a silver powder coat finish
or solid veneer (same finishes as
veneer tops). Veneer panels interior
finish, black powder coat sheet
metal.
Panels feature black nylon fastners
and are easily removable without
tools, providing immediate access to
wiring, in compliance with UL
guidelines.
Table with drum base
All 48� deep tables feature a 18�
drum with 25� footplate.
All 48� square, rounded square,
single base rectangular and bullet
tables feature a 18� drum with 30�
footplate. Also used on 54� round
tables
All 60� width tables including the
round and rounded square tables
feature a 23� drum with 30� footplate.
Peanut base
All 42�,48�, and 60� tables feature
the 27� x8� Peanut base.
Installation
Field attachment of Drum and
Peanut base to table top is necessary.
Some larger configurations require
attachment of support frame. Tops
ship with pre-drilled holes for frame
attachment.
Connecting plate:
For configurations using more than
one segment, tops must connected
using connector plates (included in
box), inserted in pre-drilled holes.
305
Three different sizes of Drum bases are offered, to suit different depth tables.
Certain larger tables may required support frames under the table top. A
Peanut base suits all table sizes.
P4S-BOXM( )
P4SD-BOXM( )
Leveling: Drum base
All Drums have leveling nuts to
allow for irregularities in the floor.
Leveling: Peanut base
All peanut bases have leveling glides
to allow for irregularities in the floor.
KnollStudio
Electrical options
Tables with Drum and Peanut bases
can be hardwired using pre-wired or
empty Plexus boxes or plugged-in
with Plexus boxes with cordset. All
Drum and Peanut base tables can
accomodate shallow medium plexus
boxes; 60� tables can also
accomodate double wide shallow
medium boxes. Please specifiy boxes
separately.
All Drum and Peanut bases feature
internal wire management hooks.
The drum base includes an 11�
cut-out in the footplate to allow
enclosure of floor power monuments.
The Peanut base has an opening in
its base of up to 8� deep and 27�
wide, to allow enclosure of floor
power monuments.
Electrical options:
Compatible with shallow Plexus
Boxes. All Drum/Peanut bases
feature internal wire managment
hooks. All tables with frames ship
also ship with wire management
C-clips.
Shipping:
Tops, Drum/Peanut bases and frames
are shipped separately. Drum and
Peanut bases ship fully-assembled.
Support frames, required for some
larger tables are shipped in a box.
Tops are predrilled for frame or base.