You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
pattern no.<br />
laminate/<br />
3mm edge<br />
laminate/<br />
molded edge<br />
veneer/<br />
3mm edge veneer/wood edge<br />
P2-I02 * $883. $1,204. $2,956. $3,477.<br />
P2-I04 * 898. 1,245. 3,023. 3,530.<br />
P2-I06 * 928. 1,284. 3,060. 3,579.<br />
P2-I10 * 1,201. 1,481. 2,960. 3,477.<br />
P2-I14 1,645. 2,020. 3,223. 3,756.<br />
P2-I16 1,759. 2,161. 3,280. 3,819.<br />
P2-I23 * 1,797. 2,201. 3,339. 3,891.<br />
P2-I24 1,759. 2,161. 3,298. 3,846.<br />
P2-I27 1,821. 2,227. 3,364. 3,917.<br />
P2-I25 1,815. 2,232. 3,326. 3,875.<br />
P2-I28 1,877. 2,297. 3,393. 3,944.<br />
P2-I26 1,873. 2,301. 3,349. 3,902.<br />
P2-I29 1,994. 2,438. 3,968. 5,934.<br />
P2-I34 1,873. 2,301. 3,479. 4,040.<br />
P2-I36 1,987. 2,443. 3,557. 4,131.<br />
P2-J02 * 859. 1,055. 2,956. 3,477.<br />
P2-J04 * 952. 1,171. 3,023. 3,530.<br />
P2-J12 * 1,146. 1,408. 3,169. 3,701.<br />
P2-J14 1,261. 1,550. 3,223. 3,756.<br />
P2-J21 * 1,201. 1,478. 3,196. 3,721.<br />
P2-J22 * 1,261. 1,550. 3,218. 3,756.<br />
P2-J23 * 1,325. 1,615. 3,285. 3,826.<br />
P2-J24 1,374. 1,689. 3,298. 3,846.<br />
P2-J27 1,438. 1,756. 3,364. 3,917.<br />
P2-J32 * 1,374. 1,689. 3,407. 3,957.<br />
P2-J34 1,488. 1,830. 3,479. 4,040.<br />
P2-G26 1,930. 2,372. 3,901. 5,863.<br />
P2-G29 1,951. 2,285. 3,968. 5,676.<br />
P2-G36 2,042. 2,513. 4,245. 6,377.<br />
Electrical<br />
Grommet Options:<br />
Tables may be specified with zero, one or<br />
two grommets. All grommets are 3 1 /4� in<br />
diameter. Optional grommet-mounted<br />
power or communications receptacles<br />
available, see page 354.<br />
Grommet cutout options: ($27 per cutout)<br />
No grommet (suffix Y)<br />
Single grommet, left, mid-depth (BG)<br />
Two grommets, left & right, front<br />
(DGR), (DGL), (DG)<br />
Two grommets, left & right, mid-depth<br />
(AG)<br />
Single grommet, center, front<br />
(EGR), (EGL), (EG)<br />
Single grommet, center, right (HG)<br />
* AG, BG not available on 18� deep<br />
tables<br />
Sequence Options:<br />
Tables may be specified with zero, one or<br />
two cutouts. All sequence cutouts are 2<br />
1<br />
/2� x6�. To specify Sequence, see page<br />
356.<br />
Note:<br />
Sequence is available on 24� and 30�<br />
deep Rectangular tables only. 36�,42�<br />
and 48� wide tables, ES location only.<br />
Sequence options: ($27 per cutout)<br />
No Sequence (Y)<br />
Single Sequence, center, front (ES)<br />
Two Sequence, left & right, front (DS)<br />
267<br />
Plexus options: ($27 per cutout)<br />
* Plexus Box not available<br />
For no Plexus (Y)<br />
For medium Plexus, center, mid-depth<br />
(GM)<br />
For medium Plexus, left & right,<br />
mid-depth (AM)<br />
For medium Plexus, center, front (EM),<br />
(DMR), (DML)<br />
For medium Plexus, left & right, front<br />
(DM), (EMR), (EML)<br />
Features<br />
C-Leg tables/T-Leg desks and returns:<br />
C-Leg and T-Leg desks and returns<br />
combine Propeller table features with<br />
more leg space. 24�d and 30�d tables<br />
have C-Legs mounted to the rear, 36�d<br />
tables have centered T-Legs. Legs are<br />
positioned at 3 7 /8� from table edge on the<br />
depth side.<br />
Bullet desks:<br />
Bullet desks with C-Legs are<br />
non-handed.<br />
Connecting tables:<br />
C-Leg and T-Leg tables do not connect to<br />
trapezoid tables. Connector plates have<br />
to be field-installed.<br />
Note:<br />
Propeller tables are Greenguard<br />
certified.<br />
<strong>Knoll</strong>Studio<br />
Desk for return attachment:<br />
To create an L-shaped desk<br />
configuration, specify a desk for return<br />
attachment plus a 24� or 30� deep end<br />
table/return. The fifth connector on<br />
rectangular desks and bullet desks can<br />
be positioned non-handedly to connect a<br />
return perpendicularly off the desk.<br />
Connector has to be field-installed.<br />
Returns simply attach with standard<br />
connector bars.