You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
pattern no.<br />
laminate/<br />
3mm edge<br />
laminate/<br />
molded edge<br />
veneer/<br />
3mm edge veneer/wood edge<br />
P2-C02 * $1,275. $1,605. $2,956. $3,477.<br />
P2-C04 * 1,286. 1,649. 3,023. 3,530.<br />
P2-C06 * 1,320. 1,693. 3,060. 3,579.<br />
P2-C10 * 1,482. 1,826. 2,960. 3,477.<br />
P2-C12 * 1,488. 1,830. 3,169. 3,701.<br />
P2-C14 1,605. 1,973. 3,223. 3,756.<br />
P2-C16 1,719. 2,114. 3,280. 3,819.<br />
P2-C21 * 1,545. 1,901. 3,196. 3,721.<br />
P2-C22 * 1,605. 1,973. 3,218. 3,756.<br />
P2-C23 * 1,727. 2,101. 3,349. 3,894.<br />
P2-C24 1,719. 2,114. 3,298. 3,846.<br />
P2-C27 1,843. 2,242. 3,430. 3,985.<br />
P2-C25 1,777. 2,184. 3,326. 3,875.<br />
P2-C28 1,900. 2,313. 3,459. 4,013.<br />
P2-C26 1,832. 2,254. 3,349. 3,902.<br />
P2-C29 1,957. 2,280. 3,482. 3,867.<br />
P2-C32 * 1,863. 2,114. 3,400. 3,957.<br />
P2-C34 1,924. 2,254. 3,479. 4,040.<br />
P2-C36 1,987. 2,394. 3,557. 4,131.<br />
P2-A26 1,890. 2,323. 3,901. 5,863.<br />
P2-A29 2,014. 2,453. 4,034. 6,001.<br />
P2-A36 2,005. 2,464. 4,245. 6,377.<br />
Electrical<br />
Grommet Options:<br />
Tables may be specified with zero, one or<br />
two grommets. All grommets are 3 1 /4� in<br />
diameter. Optional grommet-mounted<br />
power or communications receptacles<br />
available, see page 354.<br />
Grommet cutout options: ($27 per cutout)<br />
No grommet (suffix Y)<br />
Single grommet, left, mid-depth (BG)<br />
Two grommets, left & right, front<br />
(DGR), (DGL), (DG)<br />
Two grommets, left & right, mid-depth<br />
(AG)<br />
Single grommet, center, front<br />
(EGR), (EGL), (EG)<br />
Single grommet, center, right (HG)<br />
* AG, BG not available on 18� deep<br />
tables<br />
Sequence Options:<br />
Tables may be specified with zero, one or<br />
two cutouts. All sequence cutouts are 2<br />
1<br />
/2� x6�. To specify Sequence, see page<br />
356.<br />
Note:<br />
Sequence is available on 24� and 30�<br />
deep Rectangular C-leg tables only. 36�,<br />
42� and 48� wide tables, ES location<br />
only.<br />
Sequence options: ($27 per cutout)<br />
No Sequence (Y)<br />
Single Sequence, center, front (ES)<br />
Two Sequence, left & right, front (DS)<br />
265<br />
Plexus options: ($27 per cutout)<br />
*Plexus Box not available<br />
For no Plexus (Y)<br />
For medium Plexus, center, mid-depth<br />
(GM)<br />
For medium Plexus, left & right,<br />
mid-depth (AM)<br />
For medium Plexus, center, front (EM),<br />
(DMR), (DML)<br />
For medium Plexus, left & right,<br />
front (DM), (EMR), (EML)<br />
Features<br />
Bullet tables:<br />
Bullet tables with C-Legs are<br />
non-handed. Bullet-shaped end of the<br />
table may be positioned on left or right<br />
side during installation.<br />
C-Leg tables/T-Leg tables:<br />
C-Leg and T-Leg tables combine<br />
Propeller table features with more leg<br />
space. Tables have either two C-Legs or<br />
T-Legs. 24�d and 30�d training tables<br />
have C-Legs mounted to the rear, 36�d<br />
training tables have centered T-Legs.<br />
Legs are positioned at 3 7 /8� from table<br />
edge on the depth side. Tables have<br />
identical wire management and ganging<br />
capabilities as standard training tables,<br />
but do not connect to trapezoid tables.<br />
Note:<br />
C-Leg and T-Leg tables are available<br />
with glides only.<br />
Maintenance:<br />
See pages 27-28.<br />
<strong>Knoll</strong>Studio<br />
Note:<br />
Propeller tables are Greenguard<br />
certified.<br />
Connecting tables:<br />
Each rectangular table or bullet table<br />
includes four connector plates and two<br />
connector bars to connect rectangular<br />
tables to each other on any side. Bullet<br />
tables connect on flat depth side only.<br />
C-Leg and T-Leg tables do not connect to<br />
trapezoid tables. When not needed,<br />
connectors may be stored in additional<br />
black plastic storage port attached<br />
underneath table tops.