Lounge Chairs - Knoll

pattern no.
wood legs
upcharge
laminate/
3mm edge
laminate /
molded edge
veneer/
3mm edge veneer/wood edge
P2-R02 * $877. $1,079. $2,563. $3,057.
P2-R04 * 974. 1,198. 2,622. 3,113.
P2-R06 * 1,056. 1,297. 2,662. 3,161.
P2-R10 * 926. 1,281. 2,561. 3,057.
P2-R12 * 1,088. 1,338. 2,614. 3,119.
P2-R14 1,201. 1,478. 2,665. 3,175.
P2-R16 1,318. 1,620. 2,723. 3,237.
P2-R21 * 1,146. 1,408. 2,640. 3,141.
P2-R22 * 1,201. 1,478. 2,662. 3,175.
P2-R24 1,318. 1,620. 2,741. 3,266.
P2-R25 1,374. 1,689. 2,770. 3,293.
P2-R26 1,431. 1,760. 2,793. 3,322.
P2-R32 * 1,318. 1,620. 2,718. 3,237.
P2-R34 1,431. 1,760. 2,791. 3,322.
P2-R36 1,545. 1,901. 2,869. 3,411.
P2-B26 1,488. 1,830. 3,345. 5,282.
P2-B36 1,605. 1,973. 3,556. 5,657.
P2-N30 * 1,201. 1,478. 2,173. 2,911.
P2-N41 * 1,318. 1,620. 2,359. 3,113.
P2-N52 1,431. 1,760. 2,377. 3,161.
W-( ) 864.
W-(K) 956.
Electrical
Grommet Options:
Tables may be specified with zero, one or
two grommets. All grommets are 3 1 /4�
diameter. Optional grommet-mounted
power or communications receptacles
available, see page 354.
Grommet cutout options: ($27 per cutout)
No grommet (suffix Y)
Single grommet, left, mid-depth (BG)
Two grommets, left & right, front (DGR),
(DGL), (DG)
Two grommets, left & right, mid-depth
(AG)
Single grommet, center, front
(EGR), (EGL), (EG)
Single grommet, center, right (HG)
Single grommet, center (P2-N) (GG)
* AG, BG not available on 18� deep
tables
Sequence Options:
Tables may be specified with zero, one or
two cutouts. All sequence cutouts are 2
1
/2� x6�. To specify Sequence, see page
356.
Note:
Sequence is available on 24� and 30�
deep Rectangular tables only. 36�,42�
and 48� wide tables, ES location only.
Sequence options: ($27 per cutout)
No Sequence (Y)
Single Sequence, center, front (ES)
Two Sequence, left & right, front (DS)
259
Plexus options: ($27 per cutout)
* Plexus box not available
For no Plexus (Y)
For medium Plexus, center, mid-depth
(GM)
For medium Plexus, left & right,
mid-depth (AM)
For medium Plexus, center, front (EM),
(DMR), (DML)
For medium Plexus, left & right, front
(DM), (EMR), (EML)
For medium Plexus, center (P2-N) (GM)
+ For more detailed information, consult
the Electrical section of the Propeller
Manual.
Features
Connecting tables:
Each rectangular table, bullet table or
folding table, includes two connector
bars to connect rectangular tops to each
other on any side. Bullet tables connect
on flat depth side only. 30�d and 36� d
tables also connect to trapezoids of same
depth. When not needed, connectors
store in ports at top of table leg.
Wood Training Legs:
Legs incorporate the same S-shaped
design as the aluminum legs, without the
wire management capability. The wood
leg is solid maple or beech with a clear
or stained finish, available with a black
glide or chrome-plated locking caster.
The glide and caster are unique to the
wood leg and are not interchangeable
with the standard training legs. Finishes
are equivalent to Propeller veneer tops.
Tables with wood legs can be ganged to
tables with aluminum legs.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
KnollStudio
Square Tables:
Square tables have four legs with
rectangular table end plates. Two
connector bars per table. Square tables
gang on all four sides to training tables of
same width.