Lounge Chairs - Knoll

pattern no. list price
laminate/
3mm edge
laminate/
molded edge
veneer/
3mm edge veneer/wood edge
P2-T60 $1,318. $1,620. $3,333. $3,835.
P2-T72 1,545. 1,901. 3,470. 4,002.
P2-U60 1,032. 1,267. 2,947. 3,431.
P2-U72 1,261. 1,550. 3,086. 3,599.
P2-S30 452. 558. 941. 1,507.
P2-S36 509. 627. 1,030. 1,658.
P2-S120 859. 1,055. 1,930. 3,143.
P2-S126 1,032. 1,267. 2,283. 3,734.
Features
Connecting tables:
Each trapezoid table, segment, or bridge
top includes two hand-held connector
bars to connect tops to each other, or to
rectangular tables of the same depth.
Trapezoids connect on short sides only.
When not needed, connectors store in
ports at top of table leg. 120° segments
have additional fixed connector installed
on outer side.
Bridge tops and segments:
Pie-shaped segments and bridge tops
attach to tables with connector bars.
These tops can only be used between two
tables, not cantilevered at the end of a
single table. If desired, legs can be
retrofitted on bridge tops. Purchase leg
kit separately (see page 340).
Bridge tops have a weight capacity of
300 pounds.
Modesty screens for Trapezoid tables:
Due to the positioning of the legs on the
Trapezoid tables, modesty panels must
be attached using 90 degree connectors
drilled into the top. Please order part
number KR1C5899CT. Specify 2 per
table
Trapezoid stacking feature:
Trapezoid tables can be stacked to a
maximum height of 3 tables high by
lifting each table only 3�. Red rubber
bumpers protect worksurfaces from
marring.
Maintenance:
See pages 27-28.
Note:
Propeller tables are Greenguard
certified.
257
KnollStudio