Lounge Chairs - Knoll

P2-C, P2-V P2-C P2-R, P2-S, P2-SC
P2-R, P2-SC P2-B P2-R, P2-V, P2-SC
Grommet option:
Individual table segments may be
specified with zero, one, or two
grommets, located at mid-depth or
front edge locations. All grommets
are 3 1 /4� diameter. Optional
grommet-mounted power or
communications receptacles
available.
Grommet liners are black injection
molded ABS plastic. Yin-yang
grommet cap is textured, die-cast
aluminum with powder-coat finish.
P2-R, P2-SC , P2-VP2-R, P2-L, P2-SC P2-R, P2-V, P2-S
Legs:
Propeller’s S-shaped training leg
incorporates two separate channels
for power and communications
wiring. Cables are laid behind
flexible translucent PVC flipper
strips. Vertical leg is extruded
aluminum construction with clear
satin anodized or powder coat
finish. There are three types of
Propeller training legs:
Standard Training leg section:
255
Standard Training leg: vertical
extrusion is 3 3 /4�wx1 5 /8�d. Leg end
caps are injection-molded,
glass-filled nylon. Leg mounting
plates are aluminum die-castings
with integral storage port in a
textured paint finish.
C-leg and T-legs:
C-leg and T-leg offer additional
kneespace. Vertical extrusion is 5�w
x2 1 /4�d, same profile as conference
leg. Cast aluminum end plates with
textured paint finish. Cast
aluminum foot in textured metallic
powder coat.
KnollStudio
Glides/casters:
Glides and locking casters-black
nylon.
C-Leg has low glide at front and
high glide in the back.
T-Leg has two low glides.
Connector plates:
Aluminum die-casting with textured
paint finish. Integral storage port for
connecting tables.
Connector bars:
Bar and latch are made of cast alloy
with tumble-bead finish. Button is
injection-molded red ABS plastic.
Spring and back plate are steel
stampings.